Bedienungsanleitung Yamaha YHT-594 (Seite 2 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

554705

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

i En

Please read the following operating precautions before use. Yamaha will not be held responsible for any damage and/or injury caused by

not following the cautions below.

1. To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2. Install the speakers in a cool, dry, clean place – away from

windows, sources of heat, sources of excessive vibration, dust,

moisture or cold. Avoid sources of electrical humming (e.g.,

transformers and motors). To prevent fire or electric shock, do

not expose the speakers to rain or water.

3. To prevent the enclosure from warping or discoloring, do not

expose the speakers to direct sunlight or excessive humidity.

4. Avoid installing the speakers where foreign objects may fall onto

them and/or where they may be exposed to liquid dripping or

splashing.

5. Do not place the following objects on top of the speakers:

– Other components, as they might damage or discolor the

surface of the speakers.

– Burning objects (e.g., candles), as they might cause fire,

damage to the speakers or personal injury.

– Containers of liquid, as they might spill and cause electric

shock to the user or damage to the speakers.

6. Do not place the speakers where they are liable to be knocked

over or struck by falling objects. Stable placement will also

ensure better sound performance.

7. Placing the speakers on the same shelf or rack as the turntable

can result in feedback.

8. Any time you note distortion, reduce the volume control on your

amplifier to lower setting. Never allow your amplifier to be

driven into “clipping”. Otherwise, the speakers may be damaged.

9. When using an amplifier with a rated output power higher than

the nominal input power of the speakers, care should be taken

not to exceed the maximum input of the speakers.

10. Do not attempt to clean the speakers with chemical solvents as

this might damage the finish. Use a clean, dry cloth.

11. Do not attempt to modify or fix the speakers. Contact qualified

Yamaha service personnel when service is needed. The cabinet

should never be opened for any reason.

12. Be sure to read the “Troubleshooting” section regarding

common operating errors before concluding that the speakers are

faulty.

13. Secure placement or installation is the owner’s responsibility.

Yamaha is not liable for accidents caused by improper

placement or installation of speakers.

For NS-SW280

1. Do not operate this unit upside down. It may overheat, possibly

causing damage.

2. Do not use excessive force on switches, controls or connection

wires. When moving this unit, first disconnect the power plug

and the wires connected to other equipment. Never pull the wires

themselves.

3. Never put a hand or a foreign object into the port located on the

right side of this unit. When moving this unit, do not hold the

port, as it might cause personal injury and/or damage to this unit.

4. Since this unit has a built-in power amplifier, heat radiates from

the rear panel. Place the unit away from walls, allowing at least

20 cm (8") of space above, behind and on both sides of the unit

to prevent fire or damage. Furthermore, do not position the unit

with the rear panel facing down on the floor or other surfaces.

5. When using a humidifier, be sure to avoid condensation inside

this unit by allowing enough space around the unit and avoiding

excess humidification. Condensation might cause fire, damage

to the unit, and/or electric shock.

6. Do not cover the rear panel of this unit with a newspaper,

tablecloth, curtain, etc. to avoid obstructing heat radiation. If the

temperature inside the unit rises, it may cause fire, damage to the

unit, or personal injury.

7. Do not plug this unit into a wall outlet until all connections are

complete.

8. The voltage to be used must match that specified on the rear

panel. Using this unit with a voltage higher than specified is dan-

gerous and may cause fire, damage to the unit, and/or personal

injury. Yamaha is not responsible for damage resulting from use

of this unit with a voltage other than specified.

9. Super-bass sound reproduced by this unit may cause a turntable

to generate audio feedback. In this case, move the unit away

from the turntable.

10. This unit may be damaged if certain sounds are continuously

output at high volume level. For example, if 20 Hz–50 Hz sine

waves from a test disc or bass sounds from an electronic

instrument, etc. are continuously output, or if a turntable stylus

touches the surface of a disc, reduce the volume level to prevent

the unit from being damaged.

11. If you hear distorted noise (i.e., unnatural, intermittent “rapping”

or “hammering” sounds) from this unit, reduce the volume level.

Extremely loud movie soundtrack low frequency, bass-heavy

sounds, or similarly loud popular music passages can damage

this unit.

12. Vibration generated by super-bass sound may distort images on a

TV. In this case, move the unit away from the TV set.

13. When disconnecting the power cord from the wall outlet, grasp

the plug; do not pull the cord.

14. When you plan not to use this unit for a long period of time (i.e.

vacation, etc.), disconnect the AC power plug from the wall

outlet.

15. Install this unit near the wall outlet and where the AC power plug

can be reached easily.

For U.K. customers

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, it should be cut off and an

appropriate 3 pin plug fitted. For details, refer to the instructions

described below.

Note: The plug severed from the mains lead must be destroyed, as

a plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

Precautions

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

This unit is not disconnected from the AC power source as long

as it is connected to the wall outlet, even if this unit itself is

turned off. In this state, this unit is designed to consume a very

small quantity of power.

IMPORTANT:

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus

may not correspond with the coloured markings identifying the

terminals in your plug, proceed as follows: The wire which is

coloured BLUE must be connected to the terminal which is

marked with the letter N or coloured BLACK. The wire which

is coloured BROWN must be connected to the terminal which

is marked with the letter L or coloured RED. Make sure that nei-

ther wire is connected to the earth terminal of a three pin plug.

Yamaha YHT-594 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha YHT-594

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info