Bedienungsanleitung Yamaha YPG-525 (Seite 116 von 142) (Englisch)

571130

116

Zoom out

Zoom in

Vorherige Seite

1/142

Nächste Seite

116 DGX-620/520, YPG-625/525 Owner’s Manual

Keyboard Stand Assembly

The parts shown in the “Assembly Parts” illustration will be used. Follow the assembly instructions and

select the parts as needed.

z Attach the stand bases.

Making sure that the boards are facing the proper direc-

tion (the holes should face inside). The left and right side

boards for the DGX-520 and YPG-525 are the same shape.

Insert the joint connectors w into the holes as shown. The

joint connectors have been installed properly if you can see

a plus mark on the connector.

Attach the stand bases to the rear of the side boards,

using the 6 x 70 mm roundhead screws q. The left and

right stand bases are the same shape, and there is no differ-

ence between their front-to-back orientation. If you have

trouble screwing in the screws, use a screwdriver to rotate

the joint connectors to the appropriate position—the →

mark on the joint connectors indicates the location of the

screw hole.

Have a phillips-head (+) screwdriver ready.

Read these cautions carefully before you assemble or use the keyboard stand.

These cautions are to promote safe use of the stand and to prevent injury and damage from

occurring to you and others. By following these cautions carefully, your keyboard stand will pro-

vide you with safe and prolonged use.

• Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in

accordance with the sequence given below.

• Assembly should be carried out by at least two persons.

• Be sure to use the correct screw size, as indicated above. Use of incorrect screws can cause damage.

• Use the stand after assembly is complete. An uncompleted stand may overturn or the keyboard may drop.

•Always place the stand on a ﬂat, stable surface. Placing the stand on uneven surfaces may cause it to

become unstable or overturn, the keyboard to drop, or injury.

• Do not use the stand for anything other than its designed purpose. Placing other objects on the stand may

result in the object dropping or the stand overturning.

• Do not apply excessive force to the keyboard as it may cause the stand to overturn or the keyboard to

drop.

• Make sure the stand is sturdy and safe, and all screws have been tight and ﬁrm before use. If not, the

stand may overturn, the keyboard may drop, or may result in injury to the user.

•To disassemble, reverse the assembly sequence given below.

CAUTION

q 6 x 70 mm roundhead

screws (4 pcs.)

Side

boards

Stand

bases

Back board

w Joint connectors (4 pcs.)

e 6 x 30 mm roundhead

screws (4 pcs.)

r 5 x 16 mm roundhead

screws (4 pcs.)

Assembly Parts

t Support rail

y 4 x 45 mm ﬂathead screws

(6 pcs.)

(DGX-620/YPG-625 only)

w Joint connectors

q 6 x 70 mm

roundhead screws

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha YPG-525 Seite 116

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha YPG-525

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info