Bedienungsanleitung Yamaha yrs 1000 (Seite 54 von 684) (Englisch)

419719

Zoom out

Zoom in

Vorherige Seite

1/684

Nächste Seite

USING THE HDMI CONTROL FEATURE

52 En

You can operate the following functions using the remote control supplied with your TV if this unit and an HDMI

control-compatible TV (except some models) are connected via HDMI.

• Turning on or off the power (synchronized operation with the TV)

• Selecting the audio output component (TV or this unit)

• Adjusting the volume level (up/down and mute)

Examples of the HDMI control-compatible component are Panasonic VIERA Link compatible component (TV, DVD

player/recorder, Blu-ray Disc player) where VIERA Link is a new name of EZ Sync in North America and Toshiba

REGZA-LINK (its previous name is “CE Link” in North America) compatible TVs.

Not all 2008 Panasonic VIERA Link features are compatible with 2006/2007 EZ Sync products.

If you connect this unit to an HDMI control-compatible DVD player or Blu-ray Disc player via HDMI, you can also control the

connected component in synchronization with this unit (except some models).

1 Connect this unit to your HDMI control-compatible TV via HDMI.

For details about HDMI and HDMI components, see “Information on HDMI™” on page 16 and separate “Quick

Setup Guide”. Also in the owner’s manual supplied with your TV, refer to the information on connecting an AV

amplifier.

2 Turn on the power of all components connected via HDMI.

For details about controlling external components, see the owner’s manuals supplied with your components.

3 Set HDMI control to ON. For details, refer to page 63.

4 Check the system settings for all components connected via HDMI and activate the HDMI control

feature.

For details about setting external components, see the owner’s manuals supplied with your components. Once you

have followed steps 1 to 4, you do not need to carry out the same procedure again next time.

5 Turn off the power of your TV and then turn on the power again.

6 Set the input source selector of your TV to this unit (HDMI, etc.).

7 Select the connected component as the input source by pressing INPUT on the front panel of this

unit (or press one of the input selector buttons on the remote control). Confirm that the video

image played back on the DVD recorder (etc.) appears in your TV correctly.

8 Use the remote control supplied with your TV to turn on or off the power, select the audio output

component, and adjust the volume level of this unit.

• Check whether the HDMI control feature is activated for your TV (see the owner’s manual supplied with your TV) if you cannot

operate this unit in synchronization with your TV.

• While you are playing back audio from a non-HDMI component, turning off the power of your TV with the remote control supplied

with your TV does not turn off the power of this unit. Playback continues without being affected.

Using the HDMI control feature

Note

Notes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha yrs 1000 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha yrs 1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info