Bedienungsanleitung Yamaha YRS-2100 (Seite 45 von 455) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

516969

Zoom out

Zoom in

Vorherige Seite

1/455

Nächste Seite

Troubleshooting

43 En

PREPARATION

CONNECTION/

INITIAL SETTINGS PLAYBACK SETTINGS ABOUT THIS UNIT English

TROUBLESHOOTING

Surround sound effects

are insubstantial.

When connecting this unit with playback

component and TV digitally, the output

setting of the playback component and TV

is not valid.

Refer to the manual supplied with your component

and check the setting.

–

The listening room is not a regular shape,

or the unit or listening position is not at the

center of the right and left wall of the

listening room.

Relocate the unit or listening position.

6, 34

There is no wall in the path of the sound

beam.

Try placing a flat object, such as a board, in the path

of the sound beam.

–

When My Surround is selected, listening

position is not in front of the unit.

Listen in front of this unit.

No sound from the

internal subwoofer.

The source does not contain low bass

signals.

The level of subwoofer is low. Increase the subwoofer level with SUBWOOFER +

key.

The image is not

displayed on TV screen.

HDMI cable is not securely connected. Connect them with an HDMI connection or a

digital connection.

8, 9

Menu screen of this unit

is not displayed.

VIDEO OUTPUT jacks of this unit and TV

are not connected.

Connect the jacks with video pin cable (supplied).

The input switch of TV is not set correctly. Switch the input source for your TV. –

A digital or high-

frequency equipment

produces noises.

The unit may be placed close to digital

equipment or high-frequency equipment.

Leave these equipments from the unit.

–

The system settings

change automatically.

When “HDMI CONTROL” is set to “ON”,

operations of the TV (for example,

changing channels, etc.) may change the

system settings, such as the surround mode.

Set “HDMI CONTROL” to “OFF” or set the

system again by using its remote control.

The HDMI control

function does not work

properly.

“HDMI CONTROL” is set to “OFF”. Set “HDMI CONTROL” to “ON”. 39

The HDMI control function is disabled on

your TV.

Refer to the manual supplied with your TV and

check the setting.

–

The number of the connected HDMI

components is over the limit.

Disconnect some of the HDMI components.

–

The automatic lipsync

is not effective even

“AUTO LIP SYNC” is set

to “ON”.

The TV does not support the automatic

lipsync.

Set “AUTO LIP SYNC” to “OFF” and then

manually adjust the audio output delay.

“Not Available” appears

on the front panel

display after key

operation.

The key is unable to function in the current

condition.

Remote control

Problem Cause Remedy

See

page

The remote control

does not work and/or

function properly.

Wrong distance or angle. The remote control functions within a maximum

range of 6 m (20 ft) and no more than 30 degrees

off-axis from the front panel.

Direct sunlight or lighting (from an inverter

type of fluorescent lamp, etc.) is striking

the remote control sensor of this unit.

Reposition this unit.

–

The batteries are weak. Replace all batteries. 7

Problem Cause Remedy

See

page

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha YRS-2100 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha YRS-2100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info