YW
Wireless Netw
Owner’
© 2012 Yamaha Corporation Printed in China
English
YWA-10/EN-1
Allows Yamaha AV products equip
NETWORK port and a DC OUT jack
with a wi
Compatible devices can co
through a USB connector instead of a DC OUT jack.
Refer to the web
devices.
http://yamaha.com/
The firmware of this
improvement. Please refer
information on firmware upd
http://yamaha.com/
Features
A
YW
Internet
connection
Modem
Wireless LAN router
(base unit)
Setup procedure
Chec
• Check that the Wireless LAN router (base unit)
can connect to the
Connecting to t
• When the Wirele
WPS b
^ Carr
Connecting to the base
connect to the base unit.
• When the Wireless LAN ro
not hav
^ Carr
Connecting to the base un
configuration)” to connect to the base unit.
✻ If con
succeed, refer to “(manual configuration)” and
configure the connection.
Connecting to an A
The Wi-Fi CERTIFIED Logo is a
certification mark of the Wi-Fi
Alliance.
The Wi-Fi Protected Setup Mark
is a mark of the Wi-Fi Alliance.
a POWER indicator
b WPS indicato
c WIRELESS indicator
d Power connector
e LAN1 port, LAN2 port
f WPS button
g Reset button
• If you do not already have an Internet connection, please apply for one
before setting up this unit.
• Do not conne
Part names
Things to check before setup
Upper surface of product Rear
Side
a Check that the wireless LAN router (base unit) can connect to the
Internet without difficulty.
Notes
• If you do not currently hav
• A wireless LAN router is required to set up a conn
procedure. Please obtain a wire
avail
b Check whether the wireless LAN r
Check the owner's manual and oth
wireless LAN router.
Note
WPS (Wi-Fi Protected Setup) is a fun
connections and security on wireless LAN de
*Some Wi-Fi devices have “WPS” written on th
Step 1 Checking the base unit
W When the wireless LAN router (base unit) has a WPS button
Carry out “Step 2-A Connecting to the b
“Step 3 Connecting to an AV product”, in that order.
W When the wireless LAN router (base unit) does not have a WPS
button
Carry out “Step 2-B Connecting to the base unit (manual configuration)”,
and then “Step 3 Connecti
Computer
Internet connectivity
Wireless LAN
rou
(base unit)
Modem
Internet
connection
Notes
• This explanation details the procedure for connecting using the WPS
function. When using a base unit
function, refer to “Step 2-B Connecting to the b
configuration)” at right.
• Y
than one YW
Ref
1. Supply power to the YWA-10
a Turn on the p
to.
b Use the supplied USB power cable to
this unit to the DC T jack on the AV product.
The indicator on the front panel
minute after the indica
Note
If the AV product is not equipped with a DC OUT jack, connect to
connector on the front
2. Connect the base unit
a Press the WPS button on the wireless LAN router (base unit).
Refer to the owner’s ma
information on how to use the WPS button.
b Press and hold the WPS button on the rear of this unit for more than 5
seconds and release
The WPS indicator on the front panel lights.
c Wait until the WPS indicator turns off (this will take two minutes at
most).
Note
If the WPS indicator blinks, carry out procedu
a.
Step 2-A
Connecting to the base unit
(using WPS)
This completes connection with the base
Connecting to an AV product”.
Press and hold for more
than 5 seconds.
Notes
• When making a ma
unable to connect using the procedure described in “Step 2-A Connecting
to the base unit (using WPS)” at left, refer to the e
• If the PC you are using to con
LAN, turn the PC’
• Yof this unit if you are using more
than one YW
Refer to “T
1. Check the network that you are attempting to
connect to.
You will need the setti
when connecting or setting up this unit. Have the following table ready for use.
* Refer to the owner’s manualhe wireless LAN router (base u
information on how to check its wireless LAN settin
■ When using WEP security settings
*1: 16-d
■ When using WPA/WPA2 security settings
Note
Use only alpha-numeri
Otherwise, Yamaha cannot guarantee normal opera
Refer to the owner’s manual of the wirel
information on how to
2. Connect this unit to a PC
a Turn the PC power on.
b Use the supplied LAN cable to connect the LAN1 port (or the LAN2 port)
on this unit to the LAN port on the PC. Then, use the
power cable to connect the power co
connector on the PC.
The indicator on the front pa
minute after the indicator lights and
3. Setting up this unit
a Start the web br
b Enter “ywa.setup” in the
address field in the Web
browser, and press the Enter
key.
Note
If the login screen does n
“192.168.1.249” and press the En
appear, refer to “Troub
Step 2-B
Connecting to the base unit
(manual configuration)
Name Wireless LAN setting
(1) SSID
(2) Security mode ❑ Open ❑ Shared
(3) Security key
❑ Hexadecimal
*1
❑ ASCII
*2
(4) Def ❑ Key ❑ Ke ❑ Ke ❑ Key
(5) P
Name Wireless LAN setting
(1) SSID
(2) Security mode ❑ WP ❑ WP
(3) Encr ❑ TKIP ❑ AES
(4) P
To assure the finest performance,
manual carefully.
Keep it in a safe place for future reference.
Check that the following accessories are supplied with
the product.
Owner’
Package contents
Wireless Network
Adapter (this unit)
LAN cable
USB power cable
Continues to the back side.
YWA-10_dtp_En.fm Page 1 Thursday, April 12,
