733773
9
Zoom out
Zoom in
Vorherige Seite
1/33
Nächste Seite
16 17
If the blades no longer cut correctly or if the motor is
overloaded, check all the parts of your equipment and
replace the worn parts. If a more extensive repair is
required, contact the customer service centre.
Use:
Never operate the machine with defective guards or
without safety devices, for example deectors and/or
grass catchers, in place.
Do not put hands or feet near or under rotating parts.
Never pick up or carry the machine while the motor is
running.
Turn OFF / Power OFF the machine
– before clearing any blockages.
– before checking, cleaning or maintaining the
machine.
Start Robomower according to the instructions.When
the main power switch (11) is in the ON position, make
sure you keep your hands and feet away from the
rotating blades.
Never lift the Robomower or carry it around with the
mains switch is in the ON position.
Do not let persons use the mower who do not know
how it works or behaves.
Do not put anything on top of the Robomower or its
charging station.
Do not use the Robomower with defective blade discs,
body, defective blades, screws, nuts etc.
Avoid operating the machine in wet grass. Doing so
can cause additional wear and tear, and will increase
the amount of cleaning required.
Work interruptions:
After the machine has been turned off, the cutting
cylinder will continue to rotate for a few seconds.
Keep hands and feet well away.
Only remove blockages when the machine is standing
completely still. Ensure that the grass ejector opening
(if any) is clean.
Switch off the power when the machine is transported,
lifted or tilted.
Never leave the machine unattended. Children should
be supervised to ensure that they do not play with the
appliance.
CAUTION!
The following below outlines measures to avoid
damage and harm to both the Robomower and
people using it.
Taking care of your machine:
Switch off the power when the machine is to be
carried across uneven surfaces, for example steps.
SAFETY PRECAUTIONS SAFETY PRECAUTIONS
Downloaded from www.Manualslib.com manuals search engine
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

yard-force-sa600h

Suche zurücksetzen

  • der mähroboter zeigt nur fehler f1 an das dislplei geht an und aus immer wider fehes sol fehler micocontroler sein was kann ich machen um diesen fehler zu beheben

    Eingereicht am 20-5-2023 16:48

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yardforce SA600H wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yardforce SA600H

Yardforce SA600H Bedienungsanleitung - Deutsch - 35 seiten

Yardforce SA600H Bedienungsanleitung - Französisch - 34 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info