Bedienungsanleitung Yardforce Y0GWC3200R0 (Seite 14 von 31) (Englisch)

734892

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Usage Tips

• For most effective cleaning, keep nozzle from 8 to 24

inches (20 to 61 cm) away from cleaning surface.

• If you get nozzle too close, especially using a high

pressure nozzle, you may damage surface being

cleaned.

• Do Not get closer than 6 inches (15 cm) when cleaning

tires.

Cleaning and Applying Detergent

To apply detergent, follow these steps:

1. Review “How To Use Quick-Connect Nozzles”.

2. Prepare detergent solution as required by the job.

3.The detergent tank is fastened on the frame of the

pressure washer. Fill the detergent tank with detergent.

WARNING! Chemical Burn Hazard.

Chemicals could cause burns resulting in death or

serious injury.

• DO NOT use caustic liquid with pressure washer.

• Use ONLY pressure washer safe detergents/soaps.

Follow all manufacturer instructions.

4.Make sure black detergent nozzle is installed.

NOTICE: Detergent cannot be applied with the high

pressure nozzles (White, Yellow or Turbo).

5.Make sure the garden hose is connected to the water

inlet. Check that the high pressure hose is connected to

the spray gun and the pump. Turn on water.

6.Start the engine following instructions “How to Start Your

Pressure Washer”.

NOTICE: You must attach all hoses before you start the

engine

Starting the engine without all the hoses connected and

without the water turned on could damage the pump.

• Damage to pressure washer resulting from failure to

follow this instruction will void warranty.

7.Apply detergent to a dry surface, starting at lower portion

of area to be washed and work upward, using long, even,

overlapping strokes.

8.Allow detergent to "soak in" for 3-5 minutes before

washing and rinsing. Reapply as needed to prevent

surface from drying. DO NOT allow detergent to dry on

(prevents streaking).

Pressure Washer Rinsing

WARNING! Be extremely careful if you use the

pressure washer from a ladder, scaolding or any

other relatively unstable location. Pressure in a

running washer builds as you climb. When you

press the trigger, the recoil from the initial spray

could cause you to fall. The high pressure spray

could also cause you to fall if you are too close to

the cleaning surface.

For Rinsing:

1.Remove the black detergent nozzle, and select the

nozzles with high pressure following instructions “How

To Use Quick-Connect Nozzles”, squeeze the spray gun

trigger and wait for the detergent to clear.

WARNING Kickback from spray gun could cause you

to fall resulting in death or serious injury.

• Operate pressure washer from a stable surface.

• Be extremely careful if you must use the pressure

washer from a ladder, scaffolding, or any other similar

location.

• Firmly grasp spray gun with both hands when using high

pressure spray to avoid injury when spray gun kicks

back.

2.Keep the spray gun a safe distance from the area you

plan to spray.

3.Apply a high pressure spray to a small area, then check

the surface for damage. If no damage is found, it is okay

to continue cleaning.

4.Start at the top of the area to be rinsed, working down

with same overlapping strokes as you used for washing

and applying detergent.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yardforce Y0GWC3200R0 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info