799278
77
Zoom out
Zoom in
Vorherige Seite
1/89
Nächste Seite
Customizing Your Phone
76
The phones can only display custom information that is preset by your system administrator as the screen saver.
Before You Begin
If you want to set a custom picture as the screen saver, make sure that the custom picture has been uploaded by
your system administrator.
If you want to show custom information on the screen saver, make sure that the custom information has set by your
system administrator.
Procedure
1. Go to Menu >Basic >Display >Screensaver.
2. Select the desired screen saver type from the Screensaver Type field.
lIf you select System.
The phone automatically sets the built-in picture as the screen saver.
lIf you select Custom.
The phone automatically set the custom pictures as the screen saver, and display these pictures alternately.
lIf you select Server XML.
The phone automatically displays the custom information (for example, notifications or company logo) on the
screen saver.
3. Select Save.
Changing the Backlight and Time
You can change the brightness of the phone screen during phone activity and inactivity. The brightness auto-
matically changes after the phone has been idle for a specified time. It is not available for the T30P/T30 phone.
You can change the screen backlight and time in the following settings:
Active Level: The brightness level of the phone screen when the phone is active. Digits 1 to 10 represent different
brightness levels. 10 is the brightest level.
Inactive Level: The brightness of the phone screen when the phone is inactive. You can select a low brightness or
turn off the backlight. It is only available for the T33P/T33G phones.
Backlight Time: The delay time to change the brightness of the phone screen when the phone is inactive. Backlight
time includes the following settings:
lAlways On: Backlight is on permanently.
lAlways Off: Backlight is off permanently. It is not available for the T33P/T33G phone.
l30min,1h,2h, 4h,6h,8h or 12h: Backlight is changed when the phone is inactive after the designated time.
Procedure
1. Go to Menu >Settings >Basic Settings >Display >Backlight.
On the T33P/T33G phones, go to Menu >Basic >Display >Backlight.
2. Select the desired level from the Active Level field.
3. On the T33P/T33G phones, select the desired level from the Inactive Level field.
4. Select the desired time from the Backlight Time field.
5. Select Save.
Adjusting the Screen Contrast
You can adjust the screen contrast of the phone to make it easier to read.
The intensity of screen contrast ranges from 1 to 10 and the highest intensity is 10. It is not available on the
T33P/T33G phones.
77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yealink SIP-T33G wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yealink SIP-T33G

Yealink SIP-T33G Kurzanleitung - Deutsch, Englisch - 28 seiten

Yealink SIP-T33G Bedienungsanleitung - Holländisch - 8 seiten

Yealink SIP-T33G Kurzanleitung - Französisch, Spanisch - 28 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info