799263
111
Zoom out
Zoom in
Vorherige Seite
1/120
Nächste Seite
Optional Accessories with Your Phone
110
Before You Begin
Make sure that the Wi-Fi mode is activated.
Procedure
1. Go to Menu >Basic >Wi-Fi.
On the T43U/T42U phones, go to Menu >Settings >Basic Settings >Wi-Fi.
2. Do one of the following:
lSelect WPS >WPS (On the T48U phones, tap WPS) to use the PBC method, then long press the WPS key on
your gateway or router.
Once the WPS setup has completed successfully, the phone screen will prompt “Connect Success.”.
lSelect WPS >WPS-PIN (On the T48U phones, tap WPS-PIN) to use the PIN method, then log into your gate-
way or router’s web interface, and configure it to search the clients. For more information, refer to the doc-
umentation from the gateway or router manufacturer.
Once WPS-PIN setup has completed successfully, the web interface of the gateway or router will prompt that
the connection is successful.
Related Topic
Activating the Wi-Fi Mode
Adding a Wireless Network Manually
If SSID broadcast on your gateway or router is disabled, the wireless network might not appear in the scanning res-
ults. In that case, you must manually add a wireless network.
The phone can store up to 5 connected wireless networks.
Before You Begin
Get the available wireless network information from your system administrator. Make sure that the Wi-Fi mode is
activated.
Procedure
1. Go to Menu >Basic >Wi-Fi.
On the T43U/T42U phones, go to Menu >Settings >Basic Settings >Wi-Fi.
2. Highlight Known Network(s) and select Add.
On the T48U phones, tap Add.
3. Do the following:
lSelect None from the Security Mode field.
lIf you select WEP,WPA/WPA2 PSK, or WPA3-Personal from the Security Mode field, enter the desired pass-
word.
lIf you select 802.1x EAP from the Security Mode field, select the desired EAP method and enter the desired
values in the corresponding fields.
4. Select Save.
The connected wireless networks will be saved to the Known Network(s) list.
Related Topic
Activating the Wi-Fi Mode
Viewing the Wireless Network Information
You can view the wireless network information (for example, Profile Name, SSID or Signal Strength) when the Wi-Fi
mode is activated.
Procedure
111

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yealink SIP-T42U wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yealink SIP-T42U

Yealink SIP-T42U Bedienungsanleitung - Holländisch - 8 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info