Bedienungsanleitung Yealink T40G (Seite 138 von 184) (Englisch)

680108

138

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

User Guide for the SIP-T40G IP Phone

128

2. Press the desired BLF key to retrieve a call that is parked to the monitored user.

Note

BLF List

You can use the BLF List feature to monitor a list of users defined by your system administrator.

For example, your system administrator enables BLF List, and creates a BLF List URI (e.g.,

BLFList@example.com) including a list of user1, user2 on the server. The BLF List keys on the IP

phone can present the status of user1 and user2. The key LEDs illuminate either flashing or solid

depending on the status of those users. For more BLF List key LED indicators, refer to LED

Instructions on page 5.

You can use the BLF List keys in the following ways:

 When the monitored user is idle, press the BLF list key to dial out the phone number.

 When there is already an active call on the IP phone, you can transfer the active call to the

monitored user by pressing the BLF List key. The phone handles the active call differently

depending on the configuration of transfer mode via Dsskey. For more information on the

transfer mode on DSS key, refer to Configuring Transfer Mode on DSS Key on page 123.

 When the monitored user receives an incoming call, press the BLF list key to pick up the

call directly. Before picking up an incoming call, ensure that the BLF List Pickup Code has

been configured in advance. If the code is not configured, the phone will place a call to the

monitored user instead of picking up the incoming call of the monitored user when you

press the BLF List key.

 When there is a conversation on the monitored user, press the BLF list key to barge in and

set up a conference call. Before barging in an active call, ensure that the BLF List Barge In

Code has been configured in advance. If the code is not configured, the phone will place a

call to the monitored user instead of barging in an active call of the monitored user when

you press the BLF List key.

 When a call is being parked against the monitored phone, press the BLF List key to retrieve

the parked call from the monitored user. Before retrieving the parked call, ensure that the

BLF List Retrieve Call Parked Code has been configured in advance. If the code is not

configured, the phone will place a call to the monitored user instead of retrieving the

parked call when you press the BLF List key.

To configure BLF List settings via web user interface:

1. Click on Account->Advanced.

2. Select the desired account from the pull-down list of Account.

3. Enter the BLF List URI in the BLF List URI field.

4. (Optional.) Enter the directed call pickup code in the BLF List Pickup Code field.

Make sure that the call park code/park retrieve code is configured via web user interface at the

path: Feature->Call Pickup. For more information, refer to FAC Mode on page 110.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yealink T40G Seite 138

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yealink T40G

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info