Bedienungsanleitung Yeoman CL Electric Range (Seite 8 von 32) (Englisch)

813336

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

User Instructions

2b.37 Hold the button for 3 seconds or wait for 10 seconds to

save and exit the heating time period setting.

2b.38 Press ‘’ or ‘’ to check the timer setting for the week

timer heating mode.

2b.39 If the heating needs to be turned off, it will be necessary to

go back to the Normal Control Mode to it turn off.

When in Weekly Timer Mode switching the appliance

off with the remote will stop the light output. The heat

output will continue according to the timer settings.

Adjusting the Set Temperature

2b.40 Press the ‘+’ or ‘-’ button to increase or decrease the

temperature on the basis of COMF temperature.

COMF means the actual temperature is the same as setting.

ECO means the actual temperature is 2℃ lower than the

setting temperature.

ECO- means 4℃ lower.

COMF+ means 2℃ higher.

COMF++ means 4℃ higher.

Adaptive start control

According to room temperature and set-pointed temperature,

the heater will automatically determine the appropriate

time to heat to ensure that it will reach the set-pointed

temperature in the set time (up to 45 minutes prior to the set

time).

Advance mode

2b.41 The heating state can be advanced to the next period is

under both the daily and week timer heating mode.

If the heater is on in the current period, pressing the button

will turn the heater off.

If the heater is off in the current period, pressing the button

will turn the heater on.

Whether the actual heating will be on/off also depends on

the room temperature and setting temperature.

2b.42 Press to enter the Advance mode under the daily and

week timer heating mode, will show at the upper right

corner of the screen.

2b.43 Press again or timer period ends will exit the Advance

mode.

Window open detecting

2b.44 When the transmitter detects a rapid drop in room

temperature, it will be judged as an open window: the

warning icon will be displayed and the heating will be turned

off automatically.

2b.45 After indoor temperature rise or manual intervention (by

operating remote control), it will return to normal working

state.

3. Maintenance

IMPORTANT: THE OUTER PANELLING OF THE CL

IS MADE FROM CAST IRON. USE CAUTION WHEN

INSTALLING, REMOVING AND STORING AS THE

COMPONENTS ARE HEAVY AND SHOULD BE

HANDLED CAREFULLY.

3.1 ALWAYS UNPLUG FROM MAINS SUPPLY BEFORE

CLEANING OR UNDERTAKING ANY MAINTENANCE.

GENERAL CLEANING

3.2 Only clean the outer casing when it is cold. Do not use

abrasive cleaners.

CLEANING FRONTS

3.3 Wipe the glass viewing panel with a damp cloth and buff

with a lint free duster.

Caution: Do not use abrasive cleaners on the glass

panel. Do not spray liquids directly onto any surface of

the unit.

CLEANING THE FUEL EFFECT

To access the fuel effect it will be necessary to remove the

glass viewing panel.

3.4 Ensure the appliance is unplugged.

3.5 Remove the cast top and place carefully to one side.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yeoman CL Electric Range Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info