Bedienungsanleitung Yeti Cycles SB6C (Seite 17 von 17) (Englisch)

624619

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

34.

WARRANTY

YETI LIMITED (5) FIVE YEAR FRAME WARRANTY

(applies to SB4.5c / SB5c / Beti SB5c / SB6c / ASRc / Beti ASRc)

Yeti Cycles will repair or replace, at its option, any of the above listed frames it determines to

be defective due to defective materials and/or workmanship. The (5) ve year limited warranty

is conditioned upon the bicycle being ridden under normal conditions and having been

properly maintained. This warranty does not apply to the components attached to the frameset

such as suspension components, wheels, drive train, brakes, seat post, handlebar and stem.

This warranty applies only to the original owner and is non-transferable. This warranty is void if

the bicycle was not properly assembled by an authorized Yeti dealer.

ADDITIONAL CONDITIONS

These limited warranties do not apply to normal wear and tear, nor to claimed defects,

malfunctions or failures that result from abuse, neglect, improper assembly, improper

maintenance, alteration, collision, crash or misuse. The original owner shall pay all labor

charges connected with the repair or removal of all components. Under no circumstance does

this limited warranty include the cost of travel or shipment to and from an authorized Yeti

dealer. In order to exercise your rights under these limited warranties, the bicycle or frameset

must be presented to an authorized Yeti dealer, together with proof of purchase.

*The above warranties have been in effect since January 2012. For warranty information on Yeti

frames sold prior to that date please consult your local authorized dealer.

NO FAULT REPLACEMENT POLICY

Yeti Cycles will make replacement parts available at a minimum charge to the original owner

in the event of a crash or any other non-warranty situation. Yeti Cycles does this at its sole

discretion and reserves the right to refuse this offer.

PRODUCT LIFE CYCLE

Every YETI frameset has a useful product life cycle. The length of that useful product life

cycle will vary depending on the construction and the materials of the frameset, maintenance

and care the frameset receives , and the amount and type of use the frameset is subjected to

over its life. YETI recommends that an authorized YETI dealer should inspect the frame for

stress annually. Frame stress could cause potential failure and the signs are usually apparent

in the form of cracks, fracture lines, deformation, dents, and any other visual indicators of

abnormality. These safety checks for frame stress are important to prevent accidents, injury to

the cyclist, and product failure of a YETI frameset.

DISCLAIMER

YETI Cycles is not responsible for any damages to you or others arising from riding,

transporting or other use of your bicycle. In the event that your frame breaks or malfunctions,

YETI Cycles shall have no liability or obligation beyond the repair or replacement of your frame

pursuant to the terms outlined in the warranty.

*If you have a warranty concern, please contact your authorized Yeti dealer.

YETI CYCLES

621 Corporate Circle, Unit B

Golden, CO 80401

(p) 303-278-6909

(f) 303-278-6906

www.yeticycles.com

BUSINESS HOURS

Monday-Friday

8AM-11:30AM, 1:00PM-5:30PM

(Mountain Time)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yeti Cycles SB6C Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info