Bedienungsanleitung Yokogawa DYA Vortex Flow Converter (Seite 6 von 174) (Englisch)

540486

Zoom out

Zoom in

Vorherige Seite

1/174

Nächste Seite

<1. INTRODUCTION>

1-1

IM 01F06A00-01EN

1. INTRODUCTION

Thank you for purchasing the digitalYEWFLO

vortex ﬂ owmeter.

To ensure correct use of the instrument, please

read this manual thoroughly and fully understand

how to operate the instrument before operating it.

■ Regarding This Manual

• This manual should be provided to the end

user.

• The contents of this manual may be changed

without prior notice.

• All rights are reserved. No part of this manual

may be reproduced in any form without

Yokogawa’s written permission.

• Yokogawa makes no warranty of any kind with

regard to this material, including, but not limited

to, implied warranties of merchantability and

suitability for a particular purpose.

• All reasonable effort has been made to ensure

the accuracy of the contents of this manual.

However, if any errors or omissions are found,

please inform Yokogawa.

• The speciﬁ cations covered by this manual are

limited to those for the standard type under the

speciﬁ ed model number break-down and do not

cover custom-made instruments.

• Please note that this manual may not be

revised for any speciﬁ cation changes,

construction changes or operating part changes

that are not considered to affect function or

performance.

• Yokogawa assumes no responsibilities for this

product except as stated in the warranty.

• If the customer or any third party is harmed by

the use of this product, Yokogawa assumes

no responsibility for any such harm owing to

any defects in the product which were not

predictable, or for any indirect damages.

■ Safety and Modiﬁ cation Precautions

• The following general safety precautions must

be observed during all phases of operation,

service, and repair of this instrument. Failure

to comply with these precautions or with

speciﬁ c WARNINGS given elsewhere in

this manual violates safety standards of

design, manufacture, and intended use of the

instrument. Yokogawa assumes no liability for

the customer’s failure to comply with these

requirements. If this instrument is used in

a manner not speciﬁ ed in this manual, the

protection provided by this instrument may be

impaired.

• Yokogawa will not be liable for malfunctions or

damage resulting from any modiﬁ cation made

to this instrument by the customer.

• The following safety symbol marks are used in

this manual and instrument.

WARNING

A WARNING sign denotes a hazard. It calls

attention to procedure, practice, condition or the

like, which, if not correctly performed or adhered

to, could result in injury or death of personnel.

CAUTION

A CAUTION sign denotes a hazard. It calls

attention to procedure, practice, condition or the

like, which, if not correctly performed or adhered

to, could result in damage to or destruction of the

product.

IMPORTANT

An IMPORTANT sign denotes that attention is

required to avoid damage to the instrument or

system failure.

NOTE

A NOTE sign denotes information necessary

for essential understanding of operation and

features.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yokogawa DYA Vortex Flow Converter Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info