Bedienungsanleitung Yuneec Tornado H920 (Seite 36 von 39) (Englisch)

633010

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

GH4 CAMERA APP

NOTICE: If your camera features the function of connecting the camera aperture with

the WIFI through mobile device, you can mount your mobile device on the phone

holder for better photography experience. Taking Panasonic GH4 as an example:

Mobile APP Installation

STEP 1) Install Panasonic Image APP in your phone.

STEP 2) When turning on the Camera, press Fn1 or switch on the WiFi function in the

Settings manual.to activate Camera WiFi function, and then the WiFi Indicator will

glow solid blue.

STEP 3) Recognize the WIFI SSID and password on your camera screen, and then

connect your mobile device to the camera through the WiFi.

STEP 4) Tap the APP downloaded in your mobile device, then you can take the mobile

device as a camera aperture.

STEP 5) When the phone is activated the remote control function, it can also control the camera.

SINGLE HAND OPERATION:

Lift the center carrying handle with one hand. When holding the ProAction™ with

single hand, press the Function Switch Button in the rear of the Pitch Control Wheel.

The Control Status Indicator will glow solid blue when successfully switched.

The control right has been switched to the Pitch Control Wheel on the center carrying

handle. The Gimbal Control Stick on the right side of the ProAction™ is disabled in

Pitch direction.

NOTICE: When the user holds the ProAction™ with single hand in the Global Mode,

the user can control the camera in the Yaw direction through the Gimbal Control Stick.

Single Hand Operating Method

Roll the Pitch Control Wheel forward to move

the camera pitch/angle downward, and roll the

Pitch Control Wheel backward to move the

camera pitch/angle upward.

Angle Limits

When operating the ProAction™, it is

suggested to hold it horizontally for better

photography experience, or at least to make

sure the roll angle is less than 40 degree.

SONY® 7 CAMERA APP

MOBILE APP INSTALLATION

STEP 1) Install PlayMemories Mobile APP in your phone.

STEP 2) When turning on the SONY® α7 CAMERA, press the Menu and tap the

Application on the screen, then choose the Application List.

STEP 3) Tap the Smart Remote Embedded and recognize the WIFI SSID and password on

the camera screen, and then connect your mobile device to the camera through the WiFi.

STEP 4) After the connection is completed, you can take the mobile device as a camera aperture.

NOTICE: After the mobile device is connected to the camera. The mobile

device/camera can't record videos. It can ONLY take pictures.

TIPS: If no ‘Application List’ is in the ‘Application’ on the camera screen, please

download the APP from the SONY® official website.

PROACTION™ CONTROLS

The Power and Mode Selection Switch has three gears. The Left is Power-off, the Middle

is Follow Mode and the Right is Global Mode.

FOLLOW MODE: In the Follow Mode, the camera lens will track the gimbal in Yaw axis.

The user can only control the pitch direction through Gimbal Control Stick or Pitch Control

Wheel on the right.

GLOBAL MODE: In the Global Mode, the camera lens stick to a fixed direction instead of

following the movement of the ProAction™ Frame. The user can control the pitch direction

through Pitch Controll Wheel or Gimbal Control Stick and the Pitch Control Wheel to control Yaw

and Pitch Direction.

NOTICE: Place the ProAction™ on a flat and stable surface and then connect the gimbal

power cord into the gimbal connect port with the Poraction™. Switch on the Poraction™

and wait it to complete the initialization. Whichever mode the gimbal is in, it will boot-up.

Once the gimbal is powered on, it starts self-check and the Battery Indicator will be solid

green. At the same time, the Control Status Indicator blinks red and blue alternatively. When

the self-check (start-up) process completes, the Control Status Indicator will glow solid red.

The user can switch freely between Follow Mode and Global Mode without powering off the

gimbal.

THE PROACTION™ FEATURES TWO GIMBAL GRIPPING METHODS:

DOUBLE HANDS OPERATION:

Grip the left and right handles of the ProAction™ with both hands. The Power and Mode

Selection Switch is on the left side, while the Gimbal Control Stick is on the

right side.

NOTICE: Once the ProAction™ is started up, no matter which mode it

is in, the default mode is Double Hands Operating. The Control Status

Indicator on center carrying handle will be solid red. The user can ONLY

take control of the gimbal through Gimbal Control Stick on the right side.

Double Hands Operating Method

In the Follow Mode, the camera lens track the ProAction™ in Yaw axis. The

user can only control the pitch direction through Gimbal Control Stick

on the right.

Move the Gimbal Control Stick upward to trim the camera lens up.

Move the Gimbal Control Stick downward to trim the camera lens down.

In the Global Mode, the camera lens does not move in the direction of

the ProAction™ Frame but sticks to a fixed direction. The user can

control both the Yaw and Pitch directions through Gimbal Control Stick.

Move the Gimbal Control Stick upward/downward to trim the camera

lens up/down. Move the Gimbal Control Stick to the left/right to trim the camera lens

left/right.

NOTICE: When in the Follow Mode, the Gimbal Control Stick can't control the

GB603/CGO4 in Yaw axis. When in the Global Mode, the Gimbal Control Stick can

control the GB603/CGO4 in Pitch and Yaw axes.

Yuneec Tornado H920 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yuneec Tornado H920

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info