Bedienungsanleitung Zanker KOB57602 (Seite 3 von 44) (Deutsch, Englisch)

528970

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the

glass door since they can scratch the surface, which may result in shattering

of the glass.

• Excess spillage must be removed before the pyrolytic cleaning. Remove all

parts from the oven.

• To remove the shelf supports first pull the front of the shelf support and then

the rear end away from the side walls. Install the shelf supports in the oppo-

site sequence.

Safety instructions

Installation

Warning! Only a qualified person must install this

appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Obey the installation instruction supplied with the ap-

pliance.

• Always be careful when you move the appliance be-

cause it is heavy. Always wear safety gloves.

• Do not pull the appliance by the handle.

• Keep the minimum distance from the other applian-

ces and units.

• Make sure that the appliance is installed below and

adjacent safe structures.

• The sides of the appliance must stay adjacent to ap-

pliances or to units with the same height.

Electrical connection

Warning! Risk of fire and electrical shock.

• All electrical connections should be made by a quali-

fied electrician.

• The appliance must be earthed.

• Make sure that the electrical information on the rat-

ing plate agrees with the power supply. If not, con-

tact an electrician.

• Always use a correctly installed shockproof socket.

• Do not use multi-plug adapters and extension ca-

bles.

• Make sure not to cause damage to the mains plug

and to the mains cable. Contact the Service or an

electrician to change a damaged mains cable.

• Do not let mains cables to come in touch with the ap-

pliance door, specially when the door is hot.

• The shock protection of live and insulated parts must

be fastened in such a way that it cannot be removed

without tools.

• Connect the mains plug to the mains socket only at

the end of the installation. Make sure that there is

access to the mains plug after the installation.

• If the mains socket is loose, do not connect the

mains plug.

• Do not pull the mains cable to disconnect the appli-

ance. Always pull the mains plug.

• Use only correct isolation devices: line protecting

cut-outs, fuses (screw type fuses removed from the

holder), earth leakage trips and contactors.

• The electrical installation must have an isolation de-

vice which lets you disconnect the appliance from

the mains at all poles. The isolation device must

have a contact opening width of minimum 3 mm.

• Fully close the appliance door, before you connect

the mains plug to the mains socket.

Use

Warning! Risk of injury, burns or electric shock or

explosion.

• Use this appliance in a household environment.

• Do not change the specification of this appliance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanker KOB57602 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zanker KOB57602

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info