Bedienungsanleitung Zanussi-electrolux zdf3020 (Seite 54 von 68) (Holländisch)

128029

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Indicator lights

Rinse aid

Comes on when it is necessary to fill the rinse aid container. Refer to 'Use of rinse aid'.

1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing programme

operates.

Programme knob

• To switch on the appliance or to set a washing pro-

gramme, turn the programme knob clockwise or coun-

terclockwise. The programme marker on the pro-

gramme knob must agree with one of the washing pro-

grammes on the control panel. If the programme mark-

er agrees with a washing programme, the digital dis-

play shows the time duration of the programme. If the

programme marker does not agree with a washing

programme, the digital display shows two horizontal

bars.

• To switch off the appliance, turn the programme knob

until the programme marker agrees with the off indi-

cator.

Use the programme knob for these operations:

– To set the water softener. Refer to 'Setting the water

softener'.

– To deactivate/activate the rinse aid dispenser. Refer to

'Multitab function'.

Start/cancel button

Use the start/cancel button for these operations:

• To start the washing programme. Refer to the chapter

'Setting and starting a washing programme'.

• To cancel a washing programme in progress. Refer to

the chapter 'Setting and starting a washing pro-

gramme'.

• To set the water softener level. Refer to the chapter 'Set

the water softener'.

• To deactivate/activate the rinse aid dispenser. Refer to

the chapter 'Multitab function'.

Multitab button

Press this button to activate/deactivate the multitab func-

tion. Refer to the chapter 'Multitab function'.

Delay start button

Use the delay start button to delay the start of the washing

programme with an interval between 1 and 19 hours. Refer

to the chapter 'Setting and starting a washing pro-

gramme'.

Digital display

The display shows:

• Adjusted level of the water softener.

• Activation/deactivation of the rinse aid dispenser (only

with multitab function on).

• Programme duration.

• Remaining time to the end of the programme.

• End of a washing programme, the digital display shows

a zero.

• Number of hours in delay start.

• Fault codes.

Setting mode

The appliance is in setting mode when:

• One or more phase indicator lights are on.

• The time duration of the programme flashes in the

digital display.

The appliance must be in setting mode for these opera-

tions:

– To set a washing programme.

– To set the water softener level.

– To deactivate/activate the rinse aid dispenser.

The appliance is not in setting mode when:

• One or more phase indicator lights are on.

• The time duration of the programme does not flash.

In this condition cancel the programme to go back to the

setting mode. Refer to the chapter 'Setting and starting a

washing programme'.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi-electrolux zdf3020 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info