24
Switching off the dishwasher
If the acoustic signal has been enabled, a continuous
tone will sound for 15 seconds at the end of the dish-
washing cycle.
1
Hot steam may escape if the door is opened
immediately after the cycle has ended.
Therefore:
1. Open the door carefully.
2. Switch off the dishwasher by pressing the ON/
OFF button.
All display indicators will go out.
If you do not switch off the dishwasher, the acous-
tic signal will sound again 3 minutes later and 6
minutes later.
3
Unload the dishes
• Hot dishes are sensitive to knocks. The dishes
should therefore be allowed to cool before they
are removed.
• Leave the dishes in the dishwasher for approxi-
mately 15 minutes following the end of the cycle to
enable better drying and cooling down of dishes.
• Empty the lower basket first, then the upper bas-
ket. This will avoid water spots, which are caused
by remaining water in the upper basket dripping
onto the dishes in the lower basket.
