Bedienungsanleitung Zanussi fae 1025 v (Seite 14 von 23) (Englisch)

314780

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

7. Select the DELAY START

Before you start the programme, if you wish the

starting to be delayed, press the DELAY START

button repeatedly, to select the desired delay.

The relevant light illuminates.

8. Start the programme

To start the selected programme, press the

START/PAUSE button; the corresponding light

stops flashing.

The light illuminates.

If you have chosen a delayed start, the machine will

begin the countdown.

9. How to change an option or a

programme during its cycle

It is possible to change any option before the

programme carries it out. Before you make any

change, you must pause the washing machine by

pressing the START/PAUSE button .

Changing a running programme is

possible only by resetting it. Turn the programme

selector dial to O and then to the new programme

position. The washing water in the tub will not

emptied out. Start the new programme by

depressing the START/PAUSE button .

10. Interrupting a programme

Depress the START/PAUSE button to interrupt a

programme which is running, the corresponding light

starts to flash. Depress the button again to restart the

programme.

12 H

2 H

4 H

8 H

11. Cancelling a programme

Turn the selector dial to O to cancel a programme

which is running. Now you can select a new

programme.

12. Opening the door after the

programme has started

First set the machine to PAUSE by pressing the

START/PAUSE button.

If the door does not open, after about 2 minutes, this

means that the machine is already heating, that the

water level is above the bottom edge of the door or

that the drum is turning.

If you cannot open the door but you need to open it

you have to switch the machine off by turning the

selector dial to “O”. After about 2 minutes the door can

be opened (pay attention to the water level and

temperature!).

13. At the end of the programme

The machine stops automatically. The

START/PAUSE light and the pilot light go out.

The pilot light light up.

If the Anti-crease option has been selected, the

End pilot light remains lit and the door is locked

to indicate that the water must be emptied out before

opening the door.

To do this turn the programme selector dial to “O”

and then to programme Q (drain) or R

(spin). The spin

programme is performed at the maximum speed. In

order to avoid any creasing in synthetic, delicate and

wool items, the spin speed can be reduced by

means of the relevant selector.

Switch the machine off by turning the programme

selector dial to “O”.

Wait approx. two minutes before opening the door to

give the electric locking mechanism time to release

it.

Remove the laundry from the drum and carefully

check that the drum is empty so as to avoid any

forgotten items being damaged in a subsequent

wash (e.g. shrinking) or their colour running into a

load of whites.

If you do not intend to carry out another wash, close

the water tap.

Leave the door open to prevent the formation of

mildew and unpleasant smells.

132995650 gb.qxd 27/05/2005 12:07 Pagina 14 (Nero/Process Black pellicola)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi fae 1025 v Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info