Bedienungsanleitung Zanussi fe 804 (Seite 9 von 22) (Englisch)

314793

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

ENGLISH

6 OPTIONS button

Press this button to select one of the following

options:

• PREWASH : select this option if you wish your

laundry to be prewashed before the main wash

(not available for wool/handwash).

The prewash ends with a short spin at 650 rpm in

programmes for cotton and synthetic fabrics,

whereas in the programme for delicate fabrics the

water is only drained.

• ECONOMY : this option can be selected only

for cottons and synthetics lightly or normally

soiled with a temperature of 40°C or higher. The

washing time will be prolonged and the washing

temperature will be reduced. It allows you to save

energy and to achive a good performance of

washing at the same time.

• RINSE HOLD : when you choose this option,

the machine will not drain the water of the last

rinse, so as not to wrinkle the laundry.

At the end of the cycle, the light of the

START/PAUSE button goes off, the door is

locked, the pilot lights and remain lit, to

indicate that the water must be drained.

To complete the cycle, choose one of the

following options:

- Drain or spin :

Press the SKIP/RESET button once, all the leds

are off, then press button in order to select the

desired programme. If you wish to drain or to

spin press SKIP/RESET button until the led of

the desired function goes on.

Important! If you accidentally press the RESET

button more than once, the programme is

cancelled.

To cause the washing machine to drain the water,

select any washing programme by means of the

FABRIC button , then press RESET three

times in order to select the DRAIN position

(only the DRAIN light will remain lit).

7 START/PAUSE button

This button has two functions:

• Start: after you have selected the desired

programme and options, press this button to start

the washing machine. The light above the button

will stop flashing and remain lit.

• Pause: when you press this button again, the

programme in progress is interrupted. The light

above the button will start flashing. To restart the

programme, press the button again.

Important! You must set the washing machine to

PAUSE before you make any change in the

programme in progress.

8 SKIP/RESET button

At the end of a programme, you must press this

button once or repeatedly, in order to clear the

contents of the memory; otherwise, the next time

you switch the washing machine on, the audible

warning signals relevant to the end of the previous

cycle will be given.

You can also press the RESET button to exclude

one or several phases of the programme which is

running, as indicated below.

- set the washing machine to PAUSE by

pressingthe START/PAUSE button (the relevant

light will flash);

- press the RESET button once or several

times, until the required phase(s) is(are) cancelled

(the light next to the symbol of the phase(s) will go

out).

Example:

In this case, the spin

(at the speed provided

for the selected type of

fabric) will be

performed.

This button allows you also to select special

programmes, such as RINSES, SPIN and DRAIN.

• If the machine is already switched on because it

has just performed a washing programme, proceed

as follows:

- depress RESET once or repeatedly to cancel the

previously performed programme (all the phase

indicator lights must be off);

- select the type of fabric by means of the relevant

button;

- select the special programme:

• RINSES AND SPIN

Depress RESET once, the pilot light (WASH)

goes out.

• SPIN

Depress RESET twice, the pilot lights WASH

and RINSES go out.

•DRAIN

Depress RESET three times, the pilot lights

WASH , RINSES and SPIN go out

and only (drain) goes on.

132988260.qxd 22/06/2004 17.15 Pagina 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi fe 804 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info