Bedienungsanleitung Zanussi Z814W85BI (Seite 28 von 44) (Englisch)

765787

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

OPENING THE DOOR - ADDING GARMENTS

If the temperature and level of the

water in the drum are too high and/or

the drum is still rotating you should not

open the door.

While a programme or the delay start operates, the

appliance door is locked. The display shows the

indicator .

1. Touch the Start/Pause button.

In the display the related door lock indicator goes

off.

2. Open the appliance door. If necessary, add or

remove the items. Close the door and touch

the Start/Pause button.

The programme or the delay start continues.

END OF THE PROGRAMME

When the programme has ﬁnished, the appliance

stops automatically. The acoustic signals operate (if

they are active). The display shows

The indicator of the Start/Pause button goes

off.

The door unlocks and the indicator goes off.

1. Press button On/Off to deactivate the

appliance.

After ﬁve minutes from the end of the programme,

the energy saving function automatically

deactivates the appliance.

When you activate the appliance

again, the display shows the end of

the previous programme. Turn the

programme dial to set a new cycle.

2. Remove the laundry from the appliance.

3. Make sure that the drum is empty.

4. Keep the door and the detergent dispenser

slightly ajar to prevent mildew and odours.

DRAINING WATER OUT AFTER END OF

CYCLE

If you have chosen a programme or an option that

does not empty out the water of the last rinse, the

programme is completed, but:

• The time area shows and the display

shows the door locked .

• The indicator of the Start/Pause button

starts ﬂashing.

• The drum still turns at regular intervals to

prevent creases in the laundry.

• The door stays locked.

• You must drain the water to open the door:

1. If necessary, touch the Spin button to decrease

the spin speed proposed by the appliance.

2. Press the Start/Pause button: the

appliance drains the water and spins.

The option indicator Rinse Hold or

disappears.

If you have set Night and the spin

speed is not changed, when you press

the Start/Pause button, the

appliance only drains the water.

3. When the programme is completed and the

door locked indicator goes off, you can

open the door.

4. Press the On/Off button for a few seconds to

deactivate the appliance.

STAND-BY FUNCTION

The Stand-by function automatically deactivates the

appliance to reduce the energy consumption when:

• You do not use the appliance for 5 minutes

when no programme is running.

Press the button On/Off to activate the

appliance again.

• 5 minutes after the end of the washing

programme.

Press the On/Off button to activate the

appliance again.

The display shows the end of the last

programme.

Turn the programme dial to set a new cycle.

If the dial is rotated to the "Reset" position , the

appliance automatically turns off in 30 seconds.

If you set a programme or an option

that ends with water in the drum, the

Stand-by function doesn't

deactivate the appliance to remind

you to drain the water.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi Z814W85BI Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info