Bedienungsanleitung Zanussi ZCAN20FW1 (Seite 15 von 64) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

766222

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

•WARNING: Do not damage the refrigerant circuit.

•WARNING: Do not use electrical appliances inside the food

storage compartments of the appliance, unless they are of the

type recommended by the manufacturer.

•Do not use water spray and steam to clean the appliance.

•Clean the appliance with a moist soft cloth. Only use neutral

detergents. Do not use abrasive products, abrasive cleaning

pads, solvents or metal objects.

•Do not store explosive substances such as aerosol cans with a

flammable propellant in this appliance.

•If the supply cord is damaged, it must be replaced by the

manufacturer, its Authorised Service Centre or similarly

qualified persons in order to avoid a hazard.

SAFETY INSTRUCTIONS

INSTALLATION

WARNING! Only a qualified person

must install this appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Follow the installation instructions supplied with

the appliance.

• Always take care when moving the appliance as

it is heavy. Always use safety gloves and

enclosed footwear.

• Make sure the air can circulate around the

appliance.

• At first installation or after reversing the door

wait at least 4 hours before connecting the

appliance to the power supply. This is to allow

the oil to flow back in the compressor.

• Before carrying out any operations on the

appliance (e.g. reversing the door), remove the

plug from the power socket.

• Do not install the appliance close to radiators or

cookers, ovens or hobs.

• Do not expose the appliance to the rain.

• Do not install the appliance where there is direct

sunlight.

• Do not install this appliance in areas that are too

humid or too cold.

• When you move the appliance, lift it by the front

edge to avoid scratching the floor.

ELECTRICAL CONNECTION

WARNING! Risk of fire and electric

shock.

WARNING! When positioning the

appliance, ensure the supply cord is

not trapped or damaged.

WARNING! Do not use multi-plug

adapters and extension cables.

• The appliance must be earthed.

• Make sure that the parameters on the rating

plate are compatible with the electrical ratings

of the mains power supply.

• Always use a correctly installed shockproof

socket.

• Make sure not to cause damage to the electrical

components (e.g. mains plug, mains cable,

compressor). Contact the Authorised Service

Centre or an electrician to change the electrical

components.

• The mains cable must stay below the level of the

mains plug.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure that

there is access to the mains plug after the

installation.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi ZCAN20FW1 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info