Bedienungsanleitung Zanussi ZCI69080XE (Seite 11 von 36) (Englisch)

765929

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

OPTIHEAT CONTROL (3 STEP RESIDUAL

HEAT INDICATOR)

WARNING! / / As long as

the indicator is on, there is a risk of

burns from residual heat.

The induction cooking zones produce the heat

necessary for the cooking process directly in the

bottom of the cookware. The glass ceramic is

heated by the heat of the cookware.

The indicators / / appear when a cooking

zone is hot. They show the level of the residual heat

for the cooking zones you are currently using.

The indicator may also appear:

• for the neighbouring cooking zones even if you

are not using them,

• when hot cookware is placed on cold cooking

zone,

• when the hob is deactivated but the cooking

zone is still hot.

The indicator disappears when the cooking zone

has cooled down.

THE HEAT SETTING

Turn the knob for the heating functions to select a

heating function. To deactivate it turn the knob to

the off position .

AUTOMATIC SWITCH OFF

The function deactivates the hob

automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after you activate

the hob,

• you spill something or put something on the

control panel for more than 10 seconds (a pan,

a cloth, etc.). An acoustic signal sounds and the

hob deactivates. Remove the object or clean the

control panel.

• the hob gets too hot (e.g. when a saucepan

boils dry). Let the cooking zone cool down

before you use the hob again.

• you use incorrect cookware. The symbol

comes on and the cooking zone deactivates

automatically after 2 minutes.

• you do not deactivate a cooking zone or change

the heat setting. After some time comes on

and the hob deactivates.

The relation between the heat setting and the

time after which the hob deactivates:

Heat setting The hob deactivates

after

, 1 - 2 6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hour

AUTOMATIC HEAT UP

If you activate this function you can get a necessary

heat setting faster. The function sets the highest

heat setting for some time and then decreases to

the correct heat setting.

To activate the function a cooking zone

must be cold.

To activate the function for a cooking zone:

turn the knob for a cooking zone to the position.

shows on the display. Immediately set the

correct heat setting.

To deactivate the function: turn the knob to the

off position.

POWERBOOST

This function makes more power available to the

induction cooking zones. The function can be

activated for the induction cooking zone only for a

limited period of time. After this time the induction

cooking zone automatically sets back to the highest

heat setting.

To activate the function for a cooking zone:

touch . comes on.

To deactivate the function: change the heat

setting.

TIMER

Count Down Timer

You can use this function to set how long the

cooking zone should operate for a single cooking

session.

First set the heat setting for the cooking zone then

set the function.

To set the cooking zone: touch again and

again until the indicator of a necessary cooking

zone comes on.

To activate the function: touch of the timer to

set the time (00 - 99 minutes). When the indicator

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi ZCI69080XE Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info