Bedienungsanleitung Zanussi ZCV46250BA (Seite 4 von 28) (Englisch)

765922

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

•If the mains power supply cable is damaged, it must be

replaced by the manufacturer, its Authorised Service Centre or

similarly qualiﬁed persons to avoid an electrical hazard.

•To remove the shelf supports ﬁrst pull the front of the shelf

support and then the rear end away from the side walls. Install

the shelf supports in the opposite sequence.

•The means for disconnection must be incorporated in the ﬁxed

wiring in accordance with the wiring rules.

•WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by the

manufacturer of the appliance in the instructions for use as

suitable or hob guards incorporated in the appliance. The use

of inappropriate guards can cause accidents.

SAFETY INSTRUCTIONS

INSTALLATION

WARNING! Only a qualiﬁed person

must install this appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Follow the installation instructions supplied with

the appliance.

• Always take care when moving the appliance as

it is heavy. Always use safety gloves and

enclosed footwear.

• Do not pull the appliance by the handle.

• The kitchen cabinet and the recess must have

suitable dimensions.

• Keep the minimum distance from other

appliances and units.

• Install the appliance in a safe and suitable place

that meets installation requirements.

• Parts of the appliance carry current. Close the

appliance with furniture to prevent touching the

dangerous parts.

• The sides of the appliance must stay next to

appliances or units with the same height.

• Do not install the appliance adjacent to a door

or under a window. This prevents hot cookware

to fall from the appliance when the door or the

window is opened.

• Make sure to install a stabilizing means in order

to prevent tipping of the appliance. Refer to

Installation chapter.

ELECTRICAL CONNECTION

WARNING! Risk of ﬁre and electric

shock.

• All electrical connections should be made by a

qualiﬁed electrician.

• The appliance must be earthed.

• Make sure that the parameters on the rating

plate are compatible with the electrical ratings

of the mains power supply.

• Always use a correctly installed shockproof

socket.

• Do not use multi-plug adapters and extension

cables.

• Do not let mains cables touch or come near the

appliance door or the niche below the

appliance, especially when it operates or the

door is hot.

• The shock protection of live and insulated parts

must be fastened in such a way that it cannot be

removed without tools.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure that

there is access to the mains plug after the

installation.

• If the mains socket is loose, do not connect the

mains plug.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type fuses

removed from the holder), earth leakage trips

and contactors.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi ZCV46250BA Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info