Bedienungsanleitung Zanussi ZDC37202W (Seite 8 von 16) (Englisch)

661434

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

BEFORE FIRST USE

Before you use the appliance for the first time do

these operations:

• Clean the tumble dryer drum with a moist cloth.

• Start a short programme (e.g. 30 minutes) with

moist laundry.

DAILY USE

START A PROGRAMME

1. Prepare the laundry and load the appliance.

CAUTION! Make sure that when

you close the door, the laundry

does not catch between the

appliance door and the rubber

seal.

2. Set the correct programme and options for the

type of load.

3. Press the Start/Pause touchpad.

The programme starts.

CHANGE A PROGRAMME

1. Turn the Programme knob to OFF

2. Set the programme.

AT THE END OF THE PROGRAMME

When the programme is completed:

• An intermittent acoustic signal operates.

• The indicators Drying, End/Anticrease, Filter and

Tank comes on.

• The Start/Pause indicator is on.

The appliance continues to operate with the crease

guard phase for approximately other 30 minutes.

The crease guard phase removes creases from

your laundry.

You can remove the laundry before the crease

guard phase is completed. We recommend, for

better results, that you remove the laundry when the

phase is almost completed or completed.

When the crease guard phase is completed:

• The indicators Drying, End/Anticrease, Filter and

Tank comes on.

• Start/Pause indicator goes off.

1. Turn the Programme knob to OFF

2. Open the appliance door.

3. Remove the laundry.

4. Close the appliance door.

Always clean the filter and empty the

water container when a programme is

completed.

STAND-BY FUNCTION

To decrease the energy consumption, this function

automatically deactivates the appliance:

• After 5 minutes if you do not start the

programme.

• After 5 minutes from the end of the programme.

INDICATOR LIGHTS

These lights indicate the following functions:

• Drying: This light indicates that the appliance is

in the drying phase.

• End/Anticrease: This light is on at the end of

the cooling phase, during the anticreasing

phase and at the end of the programme.

• Filter: This light illuminates at the end of the

programme to remind you that the filters must

be cleaned.

• Condenser : This light indicate that the

condenser must be cleaned.

• Tank: This light comes on at the end of the

programme to remind you that the water

reservoir must be emptied out. This light comes

on also when the water reservoir is not inserted

correctly.

HINTS AND TIPS

PREPARING THE LAUNDRY

• Close the zippers.

• Close the fasteners of the duvet covers.

• Do not keep ties or ribbons loose (e.g. apron

ribbons). Tie them before you start a

programme.

• Remove all items from the pockets.

• If an item has the internal layer made of cotton,

turn it inside out. Make sure that the cotton layer

is always external

• We recommend that you set the correct

programme applicable for the type of fabrics

that are in the appliance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi ZDC37202W Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info