Bedienungsanleitung Zanussi zdi 112 x (Seite 29 von 64) (Holländisch)

127960

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Electrical connection - Voltage -

Overall power - Fuse

Information on the electrical connection is given on the rating plate on the

inner edge of the dishwasher door.

Water supply pressure Minimum 0,5 bar (0,05 MPa)

Maximum 8 bar (0,8 MPa)

Capacity Place settings 12

Environment concerns

The symbol on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it should be taken to the

appropriate collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. For more detailed

information about recycling of this product, please

contact your local council, your household waste disposal

service or the shop where you purchased the product.

The packaging materials are environmentally friendly and

can be recycled. The plastic components are identified by

markings, e.g. >PE<, >PS<, etc. Discard the packaging

materials in the applicable container at the community

waste disposal facilities.

Warning! To discard the appliance, follow the

procedure:

• Pull the mains plug out of the socket.

• Cut off the mains cable and mains plug and discard

them.

• Discard the door catch. This prevents the children to

close themselves inside the appliance and endanger

their lives.

Installation

Warning! Make sure that mains plug is

disconnected from the mains socket during

installation.

Important! Obey the instructions in the enclosed template

to:

• Build-in the appliance.

• Install the furniture panel.

• Connect to the water supply and drain.

Install the appliance under a counter (kitchen worktop or

sink).

If a repair is necessary, the appliance must be easily ac-

cessible for the engineer.

Put the appliance adjacent to a water tap and a drain.

For the venting of the dishwasher only water fill, water

drain and power supply cable openings are necessary.

The dishwasher has adjustable feet to allow the adjust-

ment of the height.

Make sure that the water inlet hose, the drain hose and

the supply cable are not kinked or squashed, when you

insert the machine.

Attaching the appliance to the adjacent units

Make sure that the counter below which you attach the

appliance is a safe structure (adjacent kitchen units, cab-

inets, wall).

Adjusting the level of the appliance

Make sure that the appliance is level to close and seal the

door correctly. If the level of the appliance is correct, the

door does not catch on the sides of the cabinet. If the door

does not close correctly, loosen or tighten the adjustable

feet until the appliance is level.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi zdi 112 x Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info