Bedienungsanleitung Zanussi ZDLI1510 (Seite 32 von 44) (Englisch, Holländisch)

765943

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

2. Press the on/off button to activate the

appliance.

Make sure that the appliance is in programme

selection mode.

• If the salt indicator is on, ﬁll the salt

container.

• If the rinse aid indicator is on, ﬁll the rinse

aid dispenser.

3. Load the baskets.

4. Add the detergent.

5. Set and start the correct programme for the

type of load and the degree of soil.

USING THE DETERGENT

CAUTION! Only use detergent

speciﬁcally designed for dishwashers.

1. Press the release button (B) to open the lid (C).

2. Put the detergent, in powder or tablets, in the

compartment (A).

3. If the programme has a prewash phase, put a

small quantity of detergent on the inner part of

the appliance door.

4. Close the lid. Make sure that the release button

locks into position.

SETTING AND STARTING A PROGRAMME

Starting a programme

1. Keep the appliance door ajar.

2. Press the on/off button to activate the

appliance. Make sure that the appliance is in

programme selection mode.

3. Press the programme button repeatedly until

the indicator of the programme you want to

select starts ﬂashing.

4. Close the appliance door to start the

programme.

Starting a programme with delay start

1. Set a programme.

2. Press the delay button to delay the start of the

programme by 3 hours.

The indicator is on.

3. Close the appliance door to start the

countdown.

During the countdown, it is not possible to change

the programme.

When the countdown is complete, the programme

starts.

Opening the door while the appliance

operates

Opening the door while a programme is running

stops the appliance. It may affect the energy

consumption and the programme duration. After

closing the door, the appliance continues from the

point of interruption.

If the door is opened for more than 30

seconds during the drying phase, the

running programme ends. It does not

happen if the door is opened by AirDry

function.

Do not try to close the appliance door

within 2 minutes after AirDry

automatically opens it, as this may

cause damage to the appliance.

If, afterwards, the door is closed for

another 3 minutes, the running

programme ends.

Cancelling the delay start

Press the on/off button for 3 seconds until the

appliance is in programme selection mode.

When you cancel the delay start, you have to set

the programme again.

Cancelling the programme

Press the on/off button for 3 seconds until the

appliance is in programme selection mode.

Make sure that there is detergent in the detergent

dispenser before you start a new programme.

The Auto Off function

This function decreases energy consumption by

deactivating automatically the appliance when it is

not operating.

The function comes into operation:

• When the programme is complete.

• After 5 minutes if a programme was not started.

End of the programme

When the programme is complete, the programme

indicator remains on until the Auto Off function

switches the appliance off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi ZDLI1510 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zanussi ZDLI1510

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info