Bedienungsanleitung Zanussi ZDLN1512 (Seite 13 von 24) (Englisch)

765959

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

arrange items in the baskets as instructed in the

user manual and do not overload the baskets.

• Do not pre-rinse dishes by hand. It increases

the water and energy consumption. When

needed, select a programme with a prewash

phase.

• Remove larger residues of food from the dishes

and empty cups and glasses before putting

them inside the appliance.

• Soak or slightly scour cookware with ﬁrmly

cooked-on or baked-on food before washing it

in the appliance.

• Make sure that items in the baskets do not

touch or cover each other. Only then can the

water completely reach and wash the dishes.

• You can use dishwasher detergent, rinse aid

and salt separately or you can use the multi-

tablets (e.g. ''All in 1''). Follow the instructions

on the packaging.

• Select a programme according to the type of

load and the degree of soil. offers the

most efﬁcient use of water and energy

consumption.

• To prevent limescale buildup inside the

appliance:

–Reﬁll the salt container whenever

necessary.

– Use the recommended dosage of the

detergent and rinse aid.

– Make sure that the current level of the water

softener agrees with the hardness of the

water supply.

– Follow the instructions in the chapter "Care

and cleaning".

USING SALT, RINSE AID AND DETERGENT

• Only use salt, rinse aid and detergent designed

for dishwasher. Other products can cause

damage to the appliance.

• In areas with hard and very hard water, we

recommend to use basic dishwasher detergent

(powder, gel, tablets containing no additional

agents), rinse aid and salt separately for optimal

cleaning and drying results.

• Detergent tablets do not fully dissolve with short

programmes. To prevent detergent residues on

the tableware, we recommend that you use

tablets with long programmes.

• Always use the correct quantity of detergent.

Insufﬁcient dosage of detergent can result in

poor cleaning results and hard-water ﬁlming or

spotting on the items. Using too much detergent

with soft or softened water results in detergent

residues on the dishes. Adjust the amount of

detergent based on the water hardness. Refer

to the instructions on the detergent packaging.

• Always use the correct quantity of rinse aid.

Insufﬁcient dosage of rinse aid decreases the

drying results. Using too much rinse aid results

in bluish layers on the items.

• Make sure that the water softener level is

correct. If the level is too high, the increased

quantity of salt in the water might result in rust

on cutlery.

WHAT TO DO IF YOU WANT TO STOP USING

MULTI-TABLETS

Before you start to use separately detergent, salt

and rinse aid, complete the following steps:

1. Set the highest level of the water softener.

2. Make sure that the salt and rinse aid containers

are full.

3. Start the shortest programme with a rinsing

phase. Do not add detergent and do put dishes

in the baskets.

4. When the programme is complete, adjust the

water softener according to the water hardness

in your area.

5. Adjust the released quantity of rinse aid.

6. Activate the rinse aid empty notiﬁcation.

LOADING THE BASKETS

• Always use the whole space of the baskets.

• Use the appliance to wash dishwasher-safe

items only.

• Do not wash the following materials in the

dishwasher: wood, horn, pewter, copper,

aluminium, delicate ornamented porcelain and

unprotected carbon steel. This can cause them

to crack, warp, discolour, pit or rust.

• Do not wash in the appliance items that can

absorb water (sponges, household cloths).

• Put hollow items (cups, glasses and pans) with

the opening facing downwards.

• Make sure that glasses do not touch each other.

• Put light or plastic items in the upper basket.

Make sure that the items do not move freely.

• Put cutlery and small items in the cutlery basket.

• Make sure that the spray arms can move freely

before you start a programme.

BEFORE STARTING A PROGRAMME

Before you start the selected programme, make

sure that:

• The ﬁlters are clean and correctly installed.

• The cap of the salt container is tight.

• The spray arms are not clogged.

• There is enough salt and rinse aid (unless you

use multi-tablets).

• The arrangement of the items in the baskets is

correct.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi ZDLN1512 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info