Bedienungsanleitung Zanussi ZDSN653X2 (Seite 33 von 48) (Englisch, Holländisch)

765957

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

increases the total water consumption of a

programme by additional 4 litres and the total

energy consumption of a programme by additional

2 Wh. The rinsing of the softener ends with a

complete drain.

Each performed softener rinse (possible more than

one in the same cycle) may prolong the programme

duration by another 5 minutes when it occurs at any

point at the beginning or in the middle of a

programme.

All the consumption values mentioned

in this section are determined in

accordance with the currently

applicable standard in laboratory

conditions with water hardness

2.5mmol/L according to the

2019/2022 regulation (water softener:

level 3).

The pressure and the temperature of

water as well as the variations of the

mains supply can change the values.

How to set the water softener level

Make sure the appliance is in user mode.

1. Press .

• The indicator still ﬂashes.

• The remaining indicators are off.

• The display shows the current setting: e.g.

= level 5.

2. Press repeatedly to change the setting.

3. Press the on/off button to conﬁrm the setting.

THE RINSE AID EMPTY NOTIFICATION

The rinse aid helps to dry the dishes without

streaks and stains. It is automatically released

during the hot rinse phase.

When the rinse aid chamber is empty, the rinse aid

indicator is turned on notifying to reﬁll rinse aid. If

the drying results are satisfactory while using multi-

tablets only, it is possible to deactivate the

notiﬁcation for reﬁlling rinse aid. However, for best

drying performance, always use rinse aid.

If standard detergent or multi-tablets without rinse

aid are used, activate the notiﬁcation to keep the

rinse aid reﬁll indicator active.

How to deactivate the rinse aid empty

notiﬁcation

Make sure the appliance is in user mode.

1. Press .

• The indicator still ﬂashes.

• The remaining indicators are off.

• The display shows the current setting.

– = the rinse aid empty notiﬁcation

is deactivated.

– = the rinse aid empty notiﬁcation

is activated.

2. Press to change the setting.

3. Press the on/off button to conﬁrm the setting.

AIRDRY

AirDry improves the drying results with less energy

consumption. The appliance door opens

automatically during the drying phase and remains

ajar.

AirDry is automatically activated with all

programmes other than (if applicable).

The duration of the drying phase and the door

opening time vary depending on the selected

programme and options.

When AirDry opens the door, the display shows the

remaining time of the running programme.

CAUTION! Do not try to close the

appliance door within 2 minutes after

automatic opening. This can cause

damage to the appliance.

If, afterwards, the door is closed for at

least 3 minutes, the running

programme ends.

CAUTION! If children have access to

the appliance, we advise to deactivate

AirDry. The automatic opening of the

door may pose a danger.

How to deactivate AirDry

Make sure the appliance is in user mode.

1. Press .

• The indicator still ﬂashes.

• The remaining indicators are off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi ZDSN653X2 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zanussi ZDSN653X2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info