Bedienungsanleitung Zanussi ZDSN653X2 (Seite 37 von 48) (Englisch, Holländisch)

765957

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

detergent based on the water hardness. Refer

to the instructions on the detergent packaging.

• Always use the correct quantity of rinse aid.

Insufﬁcient dosage of rinse aid decreases the

drying results. Using too much rinse aid results

in bluish layers on the items.

• Make sure that the water softener level is

correct. If the level is too high, the increased

quantity of salt in the water might result in rust

on cutlery.

WHAT TO DO IF YOU WANT TO STOP USING

MULTI-TABLETS

Before you start to use separately detergent, salt

and rinse aid, complete the following steps:

1. Set the highest level of the water softener.

2. Make sure that the salt and rinse aid containers

are full.

3. Start the shortest programme with a rinsing

phase. Do not add detergent and do put dishes

in the baskets.

4. When the programme is complete, adjust the

water softener according to the water hardness

in your area.

5. Adjust the released quantity of rinse aid.

6. Activate the rinse aid empty notiﬁcation.

LOADING THE BASKETS

• Always use the whole space of the baskets.

• Use the appliance to wash dishwasher-safe

items only.

• Do not wash in the appliance items made of

wood, horn, aluminium, pewter and copper as

they could crack, warp, get discoloured or

pitted.

• Do not wash in the appliance items that can

absorb water (sponges, household cloths).

• Put hollow items (cups, glasses and pans) with

the opening facing downwards.

• Make sure that glass items do not touch each

other.

• Put light items in the upper basket. Make sure

that the items do not move freely.

• Put cutlery and small items in the cutlery basket.

• Move the upper basket upwards to

accommodate large items in the lower basket.

• Make sure that the spray arms can move freely

before you start a programme.

BEFORE STARTING A PROGRAMME

Before you start the selected programme, make

sure that:

• The ﬁlters are clean and correctly installed.

• The cap of the salt container is tight.

• The spray arms are not clogged.

• There is enough salt and rinse aid (unless you

use multi-tablets).

• The arrangement of the items in the baskets is

correct.

• The programme is suitable to the type of load

and the degree of soil.

• The correct quantity of detergent is used.

UNLOADING THE BASKETS

1. Let the tableware cool down before you

remove it from the appliance. Hot items can be

easily damaged.

2. First remove items from the lower basket, then

from the upper basket.

After the programme is completed,

water can still remain on the inside

surfaces of the appliance.

CARE AND CLEANING

WARNING! Before maintenance,

deactivate the appliance and

disconnect the mains plug from the

main socket.

Dirty ﬁlters and clogged spray arms

decrease the washing results. Make a

check regularly and, if necessary, clean

them.

CLEANING THE FILTERS

The ﬁlter system is made of 3 parts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi ZDSN653X2 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zanussi ZDSN653X2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info