Bedienungsanleitung Zanussi ZEI8640XBA (Seite 8 von 20) (Englisch)

521147

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

• you spill something or put something on the

control panel for more than 10 seconds (a

pan, a cloth, etc.). An acoustic signal sounds

and the hob deactivates. Remove the object

or clean the control panel.

• the hob gets too hot (e.g. when a saucepan

boils dry). Let the cooking zone cool down

before you use the hob again.

• you use incorrect cookware. The symbol

comes on and the cooking zone deactivates

automatically after 2 minutes.

• you do not deactivate a cooking zone or

change the heat setting. After some time

comes on and the hob deactivates.

The relation between the heat setting and

the time after which the hob deactivates:

Heat setting The hob deacti-

vates after

, 1 - 2

6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hour

The heat setting

Touch to increase the heat setting. Touch

to decrease the heat setting. Touch and

at the same time to deactivate the cooking

zone.

Automatic Heat Up

If you activate this function you can get a

necessary heat setting in a shorter time. The

function sets the highest heat setting for some

time and then decreases to the correct heat

setting.

To activate the function the cooking

zone must be cold.

To activate the function for a cooking

zone: touch ( comes on). Immediately

touch ( comes on). Immediately touch

until the correct heat setting comes on. After 3

seconds comes on.

To deactivate the function: touch

To activate the function for a cooking

zone if there is no on the display: touch

then chose the highest heat setting 9 and

touch again. Immediately touch the set a

desired heat setting.

To deactivate the function: change the heat

setting.

Power function

This function makes more power available to the

induction cooking zones. The function can be

activated for the induction cooking zone only for

a limited period of time. After this time the

induction cooking zone automatically sets back

to the highest heat setting.

Refer to “Technical information”

chapter.

To activate the function for a cooking

zone: touch . comes on.

To deactivate the function: touch or .

Timer

Count Down Timer

You can use this function to set how long the

cooking zone should operate for a single

cooking session.

First set the heat setting for the cooking zone

then set the function.

To set the cooking zone: touch again and

again until the indicator of a necessary cooking

zone comes on.

To activate the function or change the

time: touch

or of the timer to set the

time (00 - 99 minutes). When the indicator of

the cooking zone starts to flash slowly the time

counts down.

To see the remaining time: set the cooking

zone with . The indicator of the cooking zone

starts to flash quickly. The display shows the

remaining time.

To deactivate the function: set the cooking

zone with and touch . The remaining time

counts back to 00. The indicator of the cooking

zone goes out.

8 www.zanussi.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi ZEI8640XBA Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zanussi ZEI8640XBA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info