Bedienungsanleitung Zanussi ZFT11110WA (Seite 18 von 48) (Deutsch, Englisch, Holländisch, Französisch)

636403

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

• be sure that frozen foodstuffs are transferred

from the foodstore to the freezer in the short-

est possible time;

• not open the door frequently or leave it open

longer than absolutely necessary;

• once defrosted, food deteriorates rapidly and

cannot be refrozen;

• do not exceed the storage period indicated

by the food manufacturer.

Care and cleaning

Caution! Unplug the appliance before

carrying out any maintenance operation.

This appliance contains hydrocarbons in its

cooling unit; maintenance and recharging

must therefore only be carried out by authorized

technicians.

Periodic cleaning

The equipment has to be cleaned regularly:

• clean the inside and accessories with luke-

warm water and some neutral soap.

• regularly check the door seals and wipe clean

to ensure they are clean and free from debris.

• rinse and dry thoroughly.

Important! Do not pull, move or damage any

pipes and/or cables inside the cabinet.

Never use detergents, abrasive powders, highly

perfumed cleaning products or wax polishes to

clean the interior as this will damage the surface

and leave a strong odour.

Clean the condenser (black grill) and the com-

pressor at the back of the appliance with a

brush. This operation will improve the perform-

ance of the appliance and save electricity con-

sumption.

Important! Take care of not to damage the

cooling system.

Many proprietary kitchen surface cleaners con-

tain chemicals that can attack/damage the plas-

tics used in this appliance. For this reason it is

recommended that the outer casing of this ap-

pliance is only cleaned with warm water with a

little washing-up liquid added.

After cleaning, reconnect the equipment to the

mains supply.

Defrosting the freezer

A certain amount of frost will always form on the

freezer shelves and around the top compart-

ment.

Defrost the freezer when the frost layer reaches

a thickness of about 3-5 mm.

Important! About 12 hours prior to defrosting,

set the Temperature Regulator toward higher

settings , in order to build up sufficient chill

reserve for the interruption in operation.

To remove the frost, follow the instructions be-

low:

1. Switch off the appliance and disconnect

the mains plug from the mains socket.

2. Remove any stored food, wrap it in several

layers of newspaper and put it in a cool

place.

Caution! Do not touch frozen goods with

wet hands. Hands can freeze to the goods.

3. Leave the door open and insert the plastic

scraper in the appropriate seating at the

bottom centre, placing a basin underneath

to collect the defrost water.

In order to

speed up the

defrosting process,

place a pot of

warm water in the

freezer compart-

ment. In addition,

remove pieces of

ice that break away

before defrosting is complete.

4. When defrosting is completed, dry the inte-

rior thoroughly and keep the scraper for fu-

ture use.

5. Switch on the appliance.

www.zanussi.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi ZFT11110WA Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info