Bedienungsanleitung Zanussi zgs 9831 ictx (Seite 19 von 48) (Deutsch, Englisch, Holländisch, Französisch)

335828

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

If the burner accidentally goes out, turn the control

knob to the off position and try to light the burner

again after minimum 1 minute.

The spark generator can start automatically when

you switch on the mains, after installation or a pow-

er cut. It is normal.

Turning the burner off

To put the flame out, turn the knob to the symbol .

Warning! Always turn the flame down or switch it off

before you remove the pans of the burner.

Helpful hints and tips

Energy savings

• If possible, always put the lids on the pans.

• When the liquid starts to boil, turn down the flame to

barely simmer the liquid.

Warning! Use pots and pans with diameter

applicable to the dimension of burner.

Do not use cooking vessels on the hotplate that overlap its

edges.

Burner Diameters of cookware

Rapid / Triple

Crown

160 - 240 mm

Semi-rapid 120 - 220 mm

Auxiliary 80 - 160 mm

Warning! Pots must not enter the control zone.

Warning! Make sure pot handles do not protrude

over the front edge of the cooktop and that pots are

centrally positioned on the rings in order to achieve

maximum stability and to obtain lower gas consumption.

Do not place unstable or deformed pots on the rings to

prevent from spill and injury.

Warning! Flame diffuser are not recommended.

Information on acrylamides

Important! According to the newest scientific knowledge, if

you brown food (specially the one which contains starch),

acrylamides can pose a health risk. Thus, we recommend

that you cook at the lowest temperatures and do not brown

food too much.

Care and cleaning

Warning! Switch the appliance off and let it cool

down before you clean it. Disconnect the appliance

from the electrical supply, before carrying out any

cleaning or maintenance work.

Warning! For safety reasons, do not clean the

appliance with steam cleaners or high-pressure

cleaners.

Warning! Do not use abrasive cleaners, steel wool

pads or acids, they can cause damage to the

appliance.

• You can remove the pan supports to easily clean the

hob.

• To clean the enamelled parts, cap and crown, wash it

with warm soapy water and dry it carefully before you

put them back.

• Wash stainless steel parts with water, and then dry with

a soft cloth.

• The pan supports are not dishwasher proof; they must

be washed by hand.

• When you wash the pan supports by hand, take care

when you dry them as the enamelling process occa-

sionally leaves rough edges. If necessary, remove

stubborn stains using a paste cleaner.

• Make sure you position the pan supports correctly after

cleaning.

• To make burners work correctly, make sure that the

arms of the pan supports are in the centre of the burn-

er.

• Be very careful when you replace the pan supports to

prevent the hob top from damage.

After cleaning, dry the appliance with a soft cloth.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi zgs 9831 ictx Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info