Bedienungsanleitung Zanussi ZIL8470CB (Seite 8 von 16) (Englisch)

671357

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Touch the control bar at the correct heat setting or

move your finger along the control bar until you

reach the correct heat setting.

BRIDGE

The function operates when the pot

covers the centres of the two zones.

This function connects two left side cooking zones

and they operate as one.

First set the heat setting for one of the left side

cooking zones.

To activate the function: touch . To set or

change the heat setting touch one of the control

sensors.

To deactivate the function: touch . The

cooking zones operate independently.

AUTOMATIC HEAT UP

Activate this function to get a desired heat setting

in a shorter time. When it is on, the zone operates

on the highest setting in the beginning and then

continues to cook at the desired heating setting.

To activate the function the cooking

zone must be cold.

To activate the function for a cooking zone:

touch ( comes on). Immediately touch a

desired heat setting. After 3 seconds comes on.

To deactivate the function: change the heat

setting.

POWERBOOST

This function makes more power available to the

induction cooking zones. The function can be

activated for the induction cooking zone only for a

limited period of time. After this time the induction

cooking zone automatically sets back to the highest

heat setting.

Refer to “Technical data” chapter.

To activate the function for a cooking zone:

touch . comes on.

To deactivate the function: change the heat

setting.

TIMER

Count Down Timer

You can use this function to set how long the

cooking zone should operate for a single cooking

session.

First set the heat setting for the cooking zone then

set the function.

To set the cooking zone: touch again and

again until the indicator of a necessary cooking

zone comes on.

To activate the function or change the time:

touch or of the timer to set the time (00 - 99

minutes). When the indicator of the cooking zone

starts to flash slowly the time counts down.

To see the remaining time: set the cooking zone

with . The indicator of the cooking zone starts to

flash quickly. The display shows the remaining time.

To deactivate the function: set the cooking zone

with and touch . The remaining time counts

back to 00. The indicator of the cooking zone goes

out.

When the time comes to an end, the

sound operates and 00 flashes. The

cooking zone deactivates.

To stop the sound: touch .

Minute Minder

You can use this function as a Minute Minder

when the hob is activated and the cooking zones

do not operate. The heat setting display shows .

To activate the function: touch . Touch or

of the timer to set the time. When the time

comes to an end, the sound operates and 00

flashes.

To stop the sound: touch .

The function has no effect on the

operation of the cooking zones.

PAUSE

This function sets all cooking zones that operate to

the lowest heat setting.

When the function operates, all other symbols on

the control panels are locked.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi ZIL8470CB Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zanussi ZIL8470CB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info