Position A
Position C
Position B
Conventional
oven
The microwave can be fitted in position A, B or C:
POSITION NICHE SIZE CHIMNEY Gap Between
W D H (min) Cupboard & Ceiling
A 560x550x450 20 50
B 560x550x450 20 50
C 560x550x460 20 Not Applicable
Measurements in (mm)
INSTALLING THE APPLIANCE
1. Remove all packaging and check carefully for
any signs of damage.
2. If the microwave is fitted in position C, ensure that
the minimum air gaps are maintained as shown in
the diagram.
3. Secure four cupboard retention blocks in position
using the setting template (TMAPTA004URR0).
4. Fit the appliance into the kitchen cupboard, lift
over the bottom/front blocks then push slowly,
and without force, until the front frame of the oven
seals against the front opening of the cupboard.
5. Ensure the appliance is stable and not leaning.
6. Fix the oven in position with the screws provided.
The fixing points are located within the louvre
areas at the top and bottom of the oven (see
diagram, item 1, on page 5).
7. Fit the frame fastner caps to the four fixing
positions (2 spare caps are provided).
8. It is important to ensure that the installation of this
product conforms to the instructions in this
operation manual and the conventional oven or
hob manufacturer’s installation instructions.
min. 20 mm
min. 20 mm
1. ZD-91D-EU English 02/02/2006 09:39 Page 39
