Bedienungsanleitung Zanussi ZNFN18FS1 (Seite 12 von 52) (Englisch, Portugiesisch, Spanisch)

766326

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

• In order to accelerate cooling down of the

goods, it is advisable to turn on the fan. The

activation of DYNAMICAIR allows greater

homogenization of internal temperatures.

• Always refer to the expiry date of the products

to know how long to keep them.

CARE AND CLEANING

WARNING! Refer to Safety chapters.

CLEANING THE INTERIOR

Before using the appliance for the ﬁrst time, the

interior and all internal accessories should be

washed with lukewarm water and some neutral

soap to remove the typical smell of a brand-new

product, then dried thoroughly.

CAUTION! Do not use detergents,

abrasive powders, chlorine or oil-

based cleaners as they will damage

the ﬁnish.

CAUTION! The accessories and parts

of the appliance are not suitable for

washing in a dishwasher.

PERIODIC CLEANING

The equipment has to be cleaned regularly:

1. Clean the inside and accessories with

lukewarm water and some neutral soap.

2. Regularly check the door seals and wipe them

clean to ensure they are clean and free from

debris.

3. Rinse and dry thoroughly.

DEFROSTING OF THE REFRIGERATOR

Frost is automatically eliminated from the

evaporator of the refrigerator compartment during

normal use. The defrost water drains out through a

trough into a special container at the back of the

appliance, over the motor compressor, where it

evaporates.

It is important to periodically clean the defrost water

drain hole in the middle of the refrigerator

compartment channel to prevent the water

overﬂowing and dripping onto the food inside.

For this purpose use the tube cleaner provided with

the appliance.

DEFROSTING OF THE FREEZER

CAUTION! Never use sharp metal

tools to scrape off frost from the

evaporator as you could damage it.

Do not use a mechanical device or any

artiﬁcial means to speed up the

thawing process other than those

recommended by the manufacturer.

About 12 hours prior to defrosting set

a lower temperature in order to build

up sufﬁcient chill reserve in case of

any interruption in operation.

A certain amount of frost will always form on the

freezer shelves and around the top compartment.

Defrost the freezer when the frost layer reaches a

thickness of about 3-5 mm.

1. Switch off the appliance or pull out electrical

plug from the wall socket.

2. Remove any stored food and put it in a cool

place.

CAUTION! A temperature rise of

the frozen food packs during

defrosting may shorten their safe

storage life.

Do not touch frozen goods with

wet hands. Hands can freeze to

the goods.

3. Leave the door open. Protect the ﬂoor from the

defrosting water e.g. with a cloth or a ﬂat

vessel.

4. In order to speed up the defrosting process,

place a pot of warm water in the freezer

compartment. In addition, remove pieces of ice

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi ZNFN18FS1 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zanussi ZNFN18FS1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info