Bedienungsanleitung Zanussi ZOB35905XU (Seite 3 von 52) (Deutsch, Englisch)

670798

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

• Ensure that the appliance is switched off before replacing the

lamp to avoid the possibility of electric shock.

• Do not use a steam cleaner to clean the appliance.

• Do not use harsh abrasive cleaners or sharp metal scrapers to

clean the glass door since they can scratch the surface, which

may result in shattering of the glass.

• If the mains power supply cable is damaged, it must be

replaced by the manufacturer, its Authorised Service Centre or

similarly qualified persons to avoid an electrical hazard.

• To remove the shelf supports first pull the front of the shelf

support and then the rear end away from the side walls. Install

the shelf supports in the opposite sequence.

SAFETY INSTRUCTIONS

INSTALLATION

WARNING! Only a qualified person

must install this appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Follow the installation instruction supplied with

the appliance.

• Always take care when moving the appliance as

it is heavy. Always use safety gloves and

enclosed footwear.

• Do not pull the appliance by the handle.

• Keep the minimum distance from the other

appliances and units.

• Make sure that the appliance is installed below

and adjacent safe structures.

• The sides of the appliance must stay adjacent to

appliances or to units with the same height.

• The appliance is equipped with an electric

cooling system. It must be operated with the

electric power supply.

ELECTRICAL CONNECTION

WARNING! Risk of fire and electrical

shock.

• All electrical connections should be made by a

qualified electrician.

• The appliance must be earthed.

• Make sure that the parameters on the rating

plate are compatible with the electrical ratings

of the mains power supply.

• Always use a correctly installed shockproof

socket.

• Do not use multi-plug adapters and extension

cables.

• Make sure not to cause damage to the mains

plug and to the mains cable. Should the mains

cable need to be replaced, this must be carried

out by our Authorised Service Centre.

• Do not let mains cables touch or come near the

appliance door, especially when the door is hot.

• The shock protection of live and insulated parts

must be fastened in such a way that it cannot be

removed without tools.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure that

there is access to the mains plug after the

installation.

• If the mains socket is loose, do not connect the

mains plug.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type fuses

removed from the holder), earth leakage trips

and contactors.

• The electrical installation must have an isolation

device which lets you disconnect the appliance

from the mains at all poles. The isolation device

must have a contact opening width of minimum

3 mm.

• This appliance complies with the E.E.C.

Directives.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi ZOB35905XU Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zanussi ZOB35905XU

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info