Bedienungsanleitung Zanussi ZOPXX8K1 (Seite 13 von 36) (Englisch)

765999

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

HOW TO SET: TIME OF DAY

After the ﬁrst connection to the mains, wait until the

display shows and 12:00. "12" ﬂashes.

1. Press or to set the hours.

2. Press .

3. Press or to set the minutes.

4. Press .

The display shows the new time.

To change the time of day press again and

again until starts to ﬂash.

HOW TO SET: DURATION

1. Set a heating function and temperature.

2. Press again and again until starts to

ﬂash.

3. Press or to set the minutes for

Duration.

4. Press or the Duration starts automatically

after 5 seconds.

5. Press or to set the hours for Duration.

6. Press or the Duration starts automatically

after 5 seconds.

When the set time ends, the signal sounds for 2

minutes. The display shows ﬂashing and time

setting. The oven turns off.

7. Press a sensor ﬁeld to stop the signal.

8. Turn off the oven.

HOW TO SET: END TIME

1. Set a heating function and temperature.

2. Press again and again until starts to

ﬂash.

3. Press or to set the End Time and press

. First you set the minutes and then the

hours.

When the set time ends, the signal sounds for 2

minutes. The display shows ﬂashing and the

time setting . The oven turns off automatically.

4. Press a sensor ﬁeld to stop the signal.

5. Turn off the oven.

HOW TO SET: TIME DELAY

1. Set a heating function and temperature.

2. Press again and again until starts to

ﬂash.

3. Press or to setthe minutes for

Duration.

4. Press .

5. Press or to set the hours for Duration.

6. Press .

The display shows ﬂashing .

7. Press or to set the End Time and press

. First you set the minutes and then the

hours.

The oven turns on automatically later on, works for

the set Durationand stops at the set End Time.

When the set time ends, the signal sounds for 2

minutes. The display shows ﬂashing and the

time setting . The oven turns off automatically.

8. Press a sensor ﬁeld to stop the signal.

9. Turn off the oven.

When the Time Delay function is

turned on, the display shows a symbol

of the heating function, with a dot

and . The dot shows which clock

function is on in the Clock / residual

heat display.

HOW TO SET: SET + GO

You can use the Set + Go function only when the

Duration is set.

1. Set a heating function and temperature.

2. Set the Duration.

3. Press again and again until the display

shows ﬂashing .

4. Press to set the Set + Go function.

The display shows and with an indicator.

This indicator shows which clock function is

activated.

5. Press a sensor ﬁeld (apart from ON / OFF) to

start the Set + Go function.

HOW TO SET: MINUTE MINDER

1. Press .

The display shows ﬂashing and "00".

2. Press to switch between options. First you

set the seconds, then the minutes and the

hours.

3. Press or to set the Minute Minder and

to conﬁrm.

4. Press or the Minute Minder starts

automatically after 5 seconds.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi ZOPXX8K1 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zanussi ZOPXX8K1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info