Bedienungsanleitung Zanussi zte 273 (Seite 9 von 68) (Deutsch, Englisch, Holländisch, Französisch)

303728

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Alarme (Buzzer)

When the drying cycle has finished, an intermittent audi-

ble signal will sound. By depressing button ALARM the

acoustic signal is switched off in the following cases:

• when selecting the programme

• when depressing the buttons

• when the programme selector dial is turned to another

position during the programme or when you depress

an option button during the cycle

• at the end of the programme.

The corresponding light comes on.

Départ différé (Delay Start)

With the Départ différé (Delay Start) button, you can

delay the start of a programme by 3, 6 or 9 hours.

1. Select the programme and additional functions.

2. Press the Départ différé (Delay Start) button as many

times as necessary (the lights show which delay time

have been chosen).

3. To activate the delay timer, press button Marche/Arrêt

(Start/Pause) . The lights 9h 6h 3h change on every

three hours until the time is getting on for start cycle.

Starting the programme

Press Marche/Arrêt (Start/Pause) button to start the dryer

after having selected the programme and the options. The

relevant light will stop flashing. If the programme selector

dial is turned to another position, when the machine is

running, the buzzer will sound and the programme phase

indicator lights will flash. The drum turns alternately in

both directions during drying.

All drying programmes end with a 10 minute cooling

phase. You may remove the laundry after this phase.

If the door of the appliance or the small door at the bottom

is opened while the programme is running, this button

must be pressed again after closing the door in order to

restart the programme from the point at which it was in-

terrupted. This button must be depressed also after a

power failure and after having reinserted the water reser-

voir, if it has been emptied in the middle of a programme

after lighting up of light Bac plein (Water Reservoir) .

In both cases the light of the Marche/Arrêt (Start/Pause)

button flashes to remind you that the start button needs

to be pressed again.

Indicator lights

These lights indicate the following functions:

• Séchage (Drying) light: This light indicates that the

appliance is in the drying phase.

• Anti-Froissage/Fin (Anticrease/End) light: This light

is on at the end of the cooling phase, during the anti-

creasing phase and at the end of the programme.

• Bac plein (Water Reservoir) light: This light indicates

that the appliance is in the drying phase. This light

comes on at the end of the programme to remind you

that the water reservoir must be emptied out. If this

light illuminates during a programme this means that

the water reservoir is full. The buzzer sounds, the pro-

gramme stops, the light of the Start/Pause button

flashes. This light comes on also when the water res-

ervoir is not inserted correctly.

• Filtres (Filter) light: This light illuminates at the end of

the programme to remind you that the filters must be

cleaned.

• Condenseur (Condenser) light: It comes on every 80

cycles to remind you that the condenser must be

cleaned.

Changing programme

To change a programme which has been selected by mis-

take once the programme has started, first turn the pro-

gramme selector to " O" (OFF) position. The programme

is cancelled.

The programme can no longer be changed directly

once the programme has started. If nevertheless

there is an attempt to change the programme on the pro-

gramme knob or if an function button (excluding the

Alarme (Buzzer) button) is pressed, led above Marche/

Arrêt (Start/Pause) button starts flashing temporarily in

yellow. The drying programme is not however affected by

this (laundry protection).

At the end of the programme

If the laundry is not removed at the end of the cycle, the

dryer performs an anticreasing phase (duration: 30 mi-

nutes maximum).

If you do not remove the laundry, the dryer will stop au-

tomatically at the end of the anticreasing phase. Lights

Anti-Froissage/Fin (Anticrease/End) , and Bac plein (Wa-

ter Reservoir) remain lit and the buzzer sounds for 2 mi-

nutes.

Turn the programme selector dial to “ O ” to switch the

machine off. Remove the laundry from the drum and care-

fully check that the drum is empty.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi zte 273 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info