649510
9
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
Important! If you turn the programme selector
dial to another programme when the machine is
working, the lights in the programme progress
display will start to flash to indicate a wrong
selection. The machine will not perform the new
selected programme.
Select the spin speed, Rinse Hold or No
spin option (
2
)
Select the spin speed, Rinse Hold option or No
Spin option by turning the spin speed selector.
For the maximum spin speed allowed by each
programme, refer to the chapter Washing pro-
grammes.
The position 1300 is equivalent to 900 rpm/
min for the synthetic and wool programmes
and 700 rpm/min for the delicate wash pro-
gramme.
The position 500 is equivalent to 500 rpm/
min for the synthetic and wool programmes
and 450 rpm/min for the delicate wash pro-
gramme.
Select the desired option by means of
buttons
7
,
8
and
9
Depending on the programme, different func-
tions can be combined. These must be selec-
ted after choosing the desired programme and
before pressing the button
6
. The relevant
light will illuminate.
Time
Quick
Daily
8h
Prewash
Extra
Rinse
Delay
Start
Start
Pause
If an incorrect option is selected, the corre-
sponding indicator lamp flashes for about 2
seconds. For the compatibility of the options
with the washing programmes, refer to the
chapter «Washing programmes».
Select the Delay Start by pressing button
5
Before you start the programme, if you wish to
delay the start, press the button
5
repeatedly,
to select the desired delay. The corresponding
pilot light will light up.
8h
4h
2h
Washing
End
Door
Delay
Start
You must select this option after you have set
the programme and before you press button
Start Pause.
You can cancel or modify the delay time at any
moment, before you press button Start Pause.
Cancelling the delayed start after having press-
ed button Start Pause :
1. Set the washing machine to PAUSE by
pressing button Start Pause.
2.
Press the button
5
repeatedly until the
light relevant to the selected delay goes
off.
3. Press button Start Pause again to start
the programme.
Important! The selected delay can be
changed only after selecting the washing
programme again.
The door will be locked throughout the delay
time (door locked light lit).
The Delay Start can not be selected with
DRAIN or SPIN programme.
Start the programme by pressing button
6
To start the selected programme, press this
button; the corresponding pilot light stops
flashing and remains lit.
On programme progress display the pilot lights
Washing and Door illuminate to indicate that
the appliance starts operating and the door is
locked.
Altering an option or a running
programme
It is possible to change any option before the
programme carries it out.
9
www.zanussi.com
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Zanussi ZWC1301 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info