Bedienungsanleitung Zanussi ZWF1200 (Seite 9 von 22) (Englisch)

24581

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

ENGLISH

You can cancel the delay time at any moment,

before you press the START/PAUSE button.

If you have already pressed the START/PAUSE

button, and you wish to cancel the delay time,

proceed as follows:

• set the washing machine to PAUSE by pressing

the START/PAUSE button;

• press the button once, the light relevant to the

selected delay goes off;

• press the START/PAUSE button again.

Important!

• The selected delay can be changed only after

selecting the washing programme again.

• The door will be locked throughout the delay time .

If you need to open the door, you must first set the

washing machine to PAUSE by pressing the

START/PAUSE button. After closing the door,

press the START/PAUSE button again.

The delay start cannot be selected with SPIN

and DRAIN programmes.

6 Programme progress display

When you choose the delayed start, the light

relevant to the selected delay lights up.

After the machine has started, the remaining time is

shown by the corresponding indicator light.

●

WASHING : when this light comes on this

means that the machine is performing the

washing programme.

●

END : end of programme

The pilot light flashes in the event of operating

problems:

- 4 flashes = the door has not been closed

- 2 flashes = the machine does not empty

- 1 flash = the machine does not fill

To eliminate the problem, see paragraph “Something

not working”.

4 H

2 H

8 H

7 Spin speed selector dial

This dial allows you to reduce the final and the

intermediate spin speeds or to select the NO SPIN

or RINSE HOLD (anti-crease) option.

The speeds on the dial refer to cotton programmes.

Position 1000, 1200, 1400 or 1600 corresponds to

900 r.p.m. for synthetics, wool and handwash; 700

r.p.m. for delicates and .

Position 500 or 700 corresponds to 450 r.p.m. for

delicates and ; 500 r.p.m. for coton, synthetics,

wool and handwash.

●

NO SPIN : by selecting this option all the

spinning phases are suppressed. To be used for

extremely delicate items.

The machine will add 3 rinses on cotton

programmes and 1 rinse on synthetic

programmes.

●

RINSE HOLD (anti-crease) : by selecting this

option the water of the last rinse is not emptied

out to prevent the fabrics from creasing. When

the programme has finished the phase light is

on to indicate that the water must be emptied

out.

To do this:

●

turn the programme selector dial to “O”

●

select the drain or spin programme.

Using the spin speed selector dial you can

choose the desired spin. If the dial remains on

position or the machine will perform the

spin speed at 400 rpm.

●

depress START/PAUSE button.

8 Programme selector dial

The selector is divided into 6 sections:

• Cotton

• Synthetics

• Delicates and handwash

• Wool

• Miniprogramme

• Special programmes (rinses , drain and spin

)

132984951GB.qxd 23/06/2006 16.26 Pagina 67

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi ZWF1200 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zanussi ZWF1200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info