9
There are two possibilities to drain out the water.
• Select the programme “Drain”
The water is drained out without spinning
• Select programme “Spin” or “Delicate Spin”
Select the spin speed by means of the relevent
button and press the “Start/Pause” button. The
water is emptied out and the laundry is spun at
the selected speed.
Attention: Before selecting “Drain”, “Spin” or
“Delicate spin” programme, the selector dial has to
be positioned on “Off”.
5. Options Button
Depending on the programme, different functions can
be combined. These must be selected after choosing
the desired programme and before pressing the
“Start/Pause” button.
When these buttons are pressed, the corresponding
LED will light up. When they are pressed again, the
corresponding LED goes out.
If an incorrect option is selected, the LED flashes for
about 2 seconds and the message Err is displayed.
Press these buttons to select the following options:
1.Prewash: Select this option if you wish your laundry
to be prewashed before the main wash (not
available for wool, handwash, mini programme and
silk programmes.
The Prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics,
whereas in the programme for delicate fabrics the
water is only drained.
2.Quick: This option can be used for lightly soiled (not
for wool, hand wash, silk and miniprogramme) in
order to obtain a good washing programme in a
short time. The washing time will be reduced
according to the type of fabric and the selected
temperature.
3.Rinse: This option can be selected with all
programmes, except the wool and handwash
programme. The machine will add 2 rinses for
cottons and 1 rinse for synthetics, delicates and silk
programme. This option is recommended for people
who are allergic to detergents, and in areas where
the water is very soft.
4.Easy Iron: Selecting this option the laundry is
gently washed and spun to avoid any creasing in
this way ironing is easier.
6. Delay start Button
The wash programme can be delayed from 30 min -
60 min - 90 min, 2 hours and then by 1 hour up to a
maximum of 23 hours by means of this button.
Selecting the Delay Start
• Select the programme and the required options.
• Select the delay start.
• Press “Start/Pause” button: the machine starts its
hourly countdown.
The programme will start after the selected delay has
expired.
Delay Start cannot be used with “Drain”, “Spin” or
“Delicate spin”
.
Cancelling the delayed start
• Press “Start/Pause” button.
• Press “Start/Pause” button until “0’” is displayed.
• Press “Start/Pause” button again.
