Bedienungsanleitung Zanussi ZWF144A2DG (Seite 20 von 32) (Englisch)

765778

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

There is also an alternative way of cancelling:

1. Rotate the selector knob to the "Reset" position

2. Wait for 1 second. The display shows .

Now, you can set a new washing programme.

OPENING THE DOOR - ADDING GARMENTS

If the temperature and level of the

water in the drum are too high and/or

the drum is still rotating you should not

open the door.

While a programme or the delay start operates, the

appliance door is locked. The display shows the

indicator .

1. Touch the Start/Pause button.

In the display the related door lock indicator goes

off.

2. Open the appliance door. If necessary, add or

remove the items. Close the door and touch

the Start/Pause button.

The programme or the delay start continues.

END OF THE PROGRAMME

When the programme has ﬁnished, the appliance

stops automatically. The acoustic signals operate (if

they are active). The display shows

The indicator of the Start/Pause button goes

off.

The door unlocks and the indicator goes off.

1. Press button ON/OFF to deactivate the

appliance.

After ﬁve minutes from the end of the programme,

the energy saving function automatically

deactivates the appliance.

When you activate the appliance

again, the display shows the end of

the previous programme. Turn the

programme dial to set a new cycle.

2. Remove the laundry from the appliance.

3. Make sure that the drum is empty.

4. Keep the door and the detergent dispenser

slightly ajar to prevent mildew and odours.

5. Close the water tap.

DRAINING WATER OUT AFTER END OF

CYCLE

If you have chosen a programme or an option that

does not empty out the water of the last rinse, the

programme is completed, but:

• The time area shows and the display

shows the door locked .

• The drum still turns at regular intervals to

prevent creases in the laundry.

• The door stays locked.

• You must drain the water to open the door:

1. If necessary, touch the Spin button to

decrease the spin speed proposed by the

appliance.

2. Press theStart/Pause button:

• If you have set Rinse Hold the

appliance drains the water and spins.

• If you have set Night the appliance only

drains the water

The option indicator Rinse Hold disappears.

3. When the programme is completed and the

door locked indicator goes off, you can

open the door.

4. Press the ON/OFF button for a few seconds

to deactivate the appliance.

STAND-BY OPTION

The Stand-by function automatically deactivates the

appliance to reduce the energy consumption when:

• You do not use the appliance for 5 minutes .

Press the button ON/OFF to activate the

appliance again.

• 5 minutes after the end of the washing

programme

Press the ON/OFF button to activate the

appliance again.

The display shows the end of the last

programme.

Turn the programme dial to set a new cycle.

If the dial is rotated to the "Reset" position , the

appliance automatically turns off in 30 seconds.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi ZWF144A2DG Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info