Bedienungsanleitung Zanussi ZWF1621S (Seite 7 von 28) (Englisch)

24671

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

• set the washing machine to PAUSE by pressing the

Start/Pause button;

• press the Delay Start button once, the light relevant to

the selected delay goes off .

• press the Start/Pause button again to start the

programme.

Important!

●

The selected delay can be changed only after

selecting the washing programme again.

●

The door will be locked throughout the delay time.

If you need to open the door, you must first set the

washing machine to PAUSE by pressing the

Start/Pause button and then wait about 2 minutes.

After you have closed the door, press the

Start/Pause button again.

The delay start can not be selected with Spin and

Drain programmes.

7 Programme progress display

When you choose the delayed start, the light relevant to

the selected delay lights up.

After the machine has started, the remaining time is

shown by the corresponding indicator light.

During the programme, only the “Washing” light stays

on. When the programme has finished, the “End” pilot

light comes on.

The “End” light flashes in the event of operating

problems:

●

4 flashes: door open

●

2 flashes: problem with water draining

●

1 flash: problem with water supply

For more information see paragraph “Something not

working”?

4 H

2 H

8 H

Washing

End

8 Spin speed selector dial

This dial allows you to reduce the final and the

intermediate spin speeds or to select the NO SPIN or

RINSE HOLD (anti-crease) option.

The speeds on the dial refer to cotton programmes.

Position 1400 (or 1500 or 1600 depending on the

model) corresponds to:

900 r.p.m. for Synthetics, Wool and Handwash, or

700 r.p.m. for Delicates and Miniprogram.

Position 500 (or 700) corresponds to:

450 r.p.m. for Delicates and Miniprogram, or

500 r.p.m. for Synthetics, Wool and Handwash.

●

NO SPIN: by selecting this option all the spinning

phases are suppressed. To be used for extremely

delicate items.

The machine will add 3 rinses on cotton

programmes and 1 rinse on synthetic programmes.

●

RINSE HOLD (anti-crease): by selecting this

option the water of the last rinse is not emptied out

to prevent the fabrics from creasing. When the

programme has finished the phase light “End” is on,

the Start/Pause light is off and the door is blocked to

indicate that the water must be emptied out.

To do this:

●

turn the programme selector dial to “O”

●

select the Drain or Spin programme.

Using the spin speed selector dial you can choose the

desired spin. If the dial remains on position RINSE

HOLD or NO SPIN the machine will perform the

spin speed at 400 rpm.

●

depress Start/Pause button.

9 Programme selector dial

The selector dial is divided into following sections:

●

Cotton and linen

●

Synthetic

●

Delicates and Handwash

●

Wool

●

Miniprogram

●

Special programmes:

(Rinses), (Drain) and

(Spin)

132984670.qxd 26/08/2005 13:06 Pagina 7 (Nero/Process Black pellicola)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi ZWF1621S Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info