24701
20
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
E
LAVADORA
WASHING MACHINE
ZWF382
ZWF3102
MANUAL DE USO
USER MANUAL
35.292.986/2
GB
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 1
26
Dear customer,
Please read these operating instructions carefully
and pay particular attention to the safety notes
indicated in the first pages. We recommend that you
keep this instruction booklet for future reference and
pass it on to any future owners.
Transport damages
When unpacking the appliance, check that it is not
damaged. If in doubt, do not use it and contact the
Service Centre.
The symbols you will see on some paragraphs of this booklet have the following meaning:
The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly
important for your safety or correct functioning of the appliance.
The information marked with this symbol provides additional instructions and practical tips on the use of
the appliance.
Tips and information about economical and ecological use of the machine are marked with this symbol.
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 26
27
ENGLISH
Maintenance 45
Bodywork 45
Detergent dispenser drawer 45
Cleaning of the drainage area 45
Water inlet filter 46
Emergency emptying out 46
Frost precautions 46
Something not working? 47-49
Warnings 28-29
Disposal 29
Tips for environmental protection 29
Technical specifications 30
Installation 31-32
Unpacking 31
Hydraulic connection 31
Levelling 32
Electrical connection 32
Your new washing machine 33
Description of the appliance 33
Detergent dispenser drawer 33
Use 34
Control panel 34
Controls 34-36
Washing hints 37
Sorting the laundry 37
Temperatures 37
Before loading the laundry 37
Maximum loads 37
Laundry weights 37
Removing stains 37
Detergents and additives 38
Quantity of detergent to be used 38
International wash code symbols 39
Operating sequence 40-41
Washing programmes 42-44
Contents
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 27
28
Installation
All internal packing must be removed before using
the appliance. Serious damage may be caused to
the machine or adjacent furniture if the protective
transit devices are not removed or are not
completely removed. Refer to the relevant
paragraph in the instruction book.
Any electrical work required to install this appliance
must be carried out by a qualified electrician.
Any plumbing work required to install this
appliance must be carried out by a qualified
plumber.
After having installed the machine, check that it is
not standing on its electrical supply cable.
If the appliance is placed on a carpeted floor,
ensure that air can circulate freely between the feet
and the floor.
The power supply cable only can be replaced by a
person of the Technical Service.
Use
This appliance is designed for domestic use. It
must not be used for purposes other than those for
which it was designed.
Only wash fabrics which are designed to be
machine washed. Follow the instructions on each
garment label.
Do not overload the appliance. Follow the
instructions in the instruction book.
Make sure that all pockets are empty. Objects such
as coins, safety pins, pins and screws can cause
extensive damage.
Do not machine wash garments saturated with
petroleum, methylated spirits, trichlorethylene, etc.
If such fluids have been used to remove stains
prior to washing, wait until they have completely
evaporated from the fabric before placing garments
in the appliance.
Place small items such as socks, belts, etc. in a
cloth bag or pillowcase to prevent them getting
trapped between the drum and the tub.
Use only the recommended quantities of fabric
softener. An excessive amount could damage the
laundry.
Warnings
Leave the porthole door slightly ajar when the
appliance is not in use. This preserves the door
seal and prevents the formation of musty smells.
Always check that water has emptied out before
opening the door. If not, drain the water following
the instructions in the instruction book.
Always unplug the appliance and shut the water
tap after use.
General safety
Repairs to the machine must be carried out only by
qualified personnel. Repairs carried out by
inexperienced persons could cause serious
danger. Contact your local Service Centre.
Never pull the power supply cable to remove the
plug from the socket; always take hold of the plug
itself.
During high temperature wash programmes the
door glass may get hot. Do not touch it!
The following warnings are provided in the interests of overall safety. You must read them carefully before
installing or using the appliance.
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 28
29
ENGLISH
Disposal
Tips for environmental protection
Packaging materials
The materials marked with the symbol are
recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by disposing of
them properly in appropriate collection containers.
Machine
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product. For
more detailed information about recycling of this
product, please contact your local city office, your
household waste disposal service or the shop where
you purchased the product.
To save water, energy and to help protect the
environment, we recommend that you follow these
tips:
Normally soiled laundry may be washed without
prewashing in order to save detergent, water and
time (the environment is protected too!).
The machine works more economically if it is fully
loaded.
With adequate pre-treatment, stains and limited
soiling can be removed; the laundry can then be
washed at a lower temperature.
Measure out detergent according to the water
hardness, the degree of soiling and the quantity of
laundry being washed.
Child safety
Children are often not aware of how dangerous
electrical appliances can be. When the machine is
working, children should be carefully supervised
and not be allowed to play with the appliance.
The packaging components (e.g. plastic film,
polystyrene) can be dangerous to children - danger
of suffocation! Keep them out of children’s reach.
Keep all detergents in a safe place out of children’s
reach.
Make sure that children or pets do not climb into
the drum.
When the appliance is to be scrapped, cut off the
electrical supply cable and destroy the plug with
the remaining cable. Disable the door catch in
order to prevent children from becoming trapped
inside while playing.
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 29
30
DIMENSIONS Height 85 cm
Width 60 cm
Depth 60 cm
MAXIMUM RECOMMEND LOAD Cotton, linen 5 kg
Synthetics 2 kg
Delicates 2 kg
Woollens 1 kg
SPIN SPEED ZWF382 800 rpm máx.
ZWF3102 1000 rpm máx.
POWER SUPPLY VOLTAGE/FREQUENCY 230 V/50 Hz
TOTAL POWER ABSORBED 2100 W
MINIMUM FUSE PROTECTION 10 A
WATER PRESSURE Minimum 50 kPa
Maximum 800 kPa
This appliance complies with the following EEC Directives:
73/23/EEC of 19/02/73 relating to low voltage
89/336/EEC of 03/05/89 relating to electromagnetic compatibility.
Technical specifications
It is dangerous to alter the specifications or attempt to modify this product in any way.
Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
Any electrical work required to install this appliance should be carried out by a qualified electrician or
competent person.
Any plumbing work required to install this appliance should be carried out by a qualified plumber or
competent person.
The power supply cable only can be replaced by a person of our Service Force Centre.
Installation instructions
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 30
32
1,5 m. Max.
60 cm. Min.
90 cm. Max.
IMPORTANT: The distance from the floor to the
highest part of the hose should be between 60 to
90 cm. (It is advised to be between 60 and 70 cm).
The hose must not be bent nor twisted to avoid
clogging. Should a prolongation of the discharging
hose be unavoidable this must never surpass 1.5 m
and must be of the same diameter as the original
hose.
Make sure the hoses are not too tense.
Levelling
Level the appliance by loosening or tightening the
feet. Once in the right position fix the feet by
pushing the nuts (A) (see graphic P0254) against
the base of the case. Accurate levelling will prevent
vibration, noise and displacement of the appliance
during operation.
Some vibration is inevitable, especially if placed on
a wooden floor. Wooden floors are particularly
susceptible to vibrations. If possible always place
the appliance on a solid floor.
Electrical connections
Before plugging the appliance make sure that:
1º. the mains of your installation is the same as on
the rating plate of your appliance (the plate is
sticked to the rear of the appliance).
2º. The meter, the fuses, the wiring and the socket
outlet can support the max. power absorbed stated
on the rating plate.
3º. The socket base and the plug must fit in
adequately without any reducing interposition,
multiple outlets or adapters. If necessary replace
the socket outlet by an adequate one.
The applicable rules for electrical security
require an adequate earthing. The plug of the
appliance is provided with such a device.
Make sure your socket outlet is provided with
an adequate earthing too.
The manufacturer declines any liability in case
of accidents or incidents should these safety
measures not be observed.
The power supply cable only can be replaced by
a person of our Service Force Centre.
P0254
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 32
33
ENGLISH
This new machine meets all modern requirements for effective treatment of laundry with low water, energy and
detergent consumption.
The balance control device reduces the risk of instability in machine movement and it guarantees a quieter
operation.
1 Detergent dispenser drawer
2 Programme chart
3 Control panel
4 Door handle
5 Drainage area door
6 Adjustable feet
Detergent dispenser drawer
Prewash
Main wash
Fabric softener, starch
Your new washing machine
Description of the appliance
R0001 3D
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 33
35
ENGLISH
7. Programme progress display
The light LAVADO will iluminate during all the
programme, turning off when it has finished.
The light FIN will illuminate to indicate that the
selected programme has finished.
The light FIN flashes in the event of operating
problems:
4 flashes: door open.
2 flashes: problem with water draining.
1 flash: problem with water supply.
For more information see paragraph "Something not
working?" at the end of this booklet.
5. INICIO / PAUSA button
After selecting the required programme, by the
programme selector (see section 8), press this
button to start the machine; the corresponding
light stops flashing and will keep lighting until
the programme finishes.
To interrupt the running programme, depress
INICIO / PAUSA button: the corresponding
light starts to flash.
To restart the programme from the point at
which it was interrupted, press INICIO / PAUSA
button again.
6. REDUCCIÓN CENTRIFUGADO
button
This button allows the reduction of the final and the
intermediate spin speed or to select the
ANTIARRUGAS option.
ZWF382 ZWF3102
Press this button so many times as it was necesary
until the relevant light turns on corresponding to the
wished option.
The speeds on the lights reference to cotton
programmes in both models (ZWF3102 and
ZWF382).
For the model ZWF3102:
- The light 1000 r.p.m. correponds to 900 r.p.m. in
synthetics and wool programmes and in the
delicates programmes corresponds to 700 r.p.m.
- The lights 700 r.p.m. and 500 r.p.m. are common
for all programmes making reference to the same
speed.
For the model ZWF382:
- The light 800 r.p.m. correponds to 700 r.p.m. in the
delicates programmes.
- The lights 700 r.p.m. and 500 r.p.m. are common
for all programmes making reference to the same
speed.
NOTE: In both models, by default, the light of spin
speed will turns on according to the selected
programme.
RINSE HOLD: by selecting this option, the water
of the last rinse is not drained, in order to prevent
the fabrics from wrinkling. When the programme has
finished, FIN light will illuminate.
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 35
36
8. Programme selector dial
The selector dial can be turned either clockwise or
counter-clockwise.
Use this selector dial to select the required
programme.
At the end of each programme the selector dial
must be turned to position “
O”, to switch off the
machine.
ATTENTION!
If the programme selector dial is turned to another
position (programme) when the machine is working,
the lights of the programme progress display start to
flash. The machine will not perform the new selected
programme, but it will continue running on the same
cycle.
REMEMBER!
In the event a wrong programme has been selected
and the machine is already working, proceed as
follows:
1. Turn the programme selector dial to position “
O”.
2. Select the new required programme.
If the machine has not already gone through the
rinse cycle, when you decide to change the running
programme, in the new programme the water and
the detergent from the previous cycle will be re-
used, making it an energy-saving tool. On the
other hand, if it is already in the rinse phase;
detergent, bleach,… must be re-measured.
3. Press INICIO / PAUSA button, to start the new
cycle.
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 36
37
ENGLISH
Washing hints
Sorting the laundry
Follow the wash code symbols on each garment
label and the manufacturer’s washing instructions.
Sort the laundry as follows:
whites, coloureds, synthetics, delicates, woollens.
Temperatures
90° for normally soiled white cottons and linen
(e.g. tea cloths, towels, tablecloths,
sheets...)
60° for normally soiled, colour fast garments
(e.g. shirts, night dresses, pyjamas....) in
linen, cotton or synthetic fibres and for
lightly soiled white cotton (e.g. underwear).
(cold)for delicate items (e.g. net curtains), mixed
30°-40° laundry including synthetic fibres and
woollens.
Before loading the laundry
Never wash whites and coloureds together. Whites
may lose their “whiteness” in the wash.
New coloured items may run in the first wash; they
should therefore be washed separately the first time.
Make sure that no metal objects are left in the
laundry (e.g. hair clips, safety pins, pins).
Button up pillowcases, close zip fasteners, hooks
and poppers. Tie any belts or long tapes.
Remove difficult stains before washing. Rub
particularly soiled areas with a special detergent or
detergent paste.
Treat curtains with special care. Remove hooks or tie
them up in a bag or net.
Maximum loads
Recommended loads are indicated in the
programme charts.
General rules:
Cotton, linen: drum full but not too tightly packed;
Synthetics: drum no more than half full;
Delicate fabrics and woollens: drum no more than
one third full.
Washing a maximum load makes the most efficient
use of water and energy.
For heavily soiled laundry, reduce the load size.
Laundry weights
The following weights are indicative:
bathrobe 1200 g
napkin 100 g
quilt cover 700 g
sheet 500 g
pillow case 200 g
tablecloth 250 g
towelling towel 200 g
tea cloth 100 g
night dress 200 g
ladies’ briefs 100 g
man’s work shirt 600 g
man’s shirt 200 g
man’s pyjamas 500 g
blouse 100 g
men’s underpants 100 g
Removing stains
Stubborn stains may not be removed by just water
and detergent. It is therefore advisable to treat them
prior to washing.
Blood: treat fresh stains with cold water. For dried
stains, soak overnight in water with a special
detergent then rub in the soap and water.
Oil based paint: moisten with benzine stain
remover, lay the garment on a soft cloth and dab the
stain; treat several times.
Dried grease stains: moisten with turpentine, lay
the garment on a soft surface and dab the stain with
the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a rust
removing product used cold. Be careful with rust
stains which are not recent since the cellulose
structure will already have been damaged and the
fabric tends to hole.
Mould stains: treat with bleach, rinse well (whites
and fast coloureds only).
Grass: soap lightly and treat with bleach (whites and
fast coloureds only).
Glue: moisten with acetone (*), lay the garment on a
soft cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat
stains with methylated spirits. Remove any residual
marks from white fabrics with bleach.
Red wine: soak in water and detergent, rinse and
treat with acetic or citric acid, then rinse. Treat any
residual marks with bleach.
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 37
38
Ink: depending on the type of ink, moisten the fabric
first with acetone (*), then with acetic acid; treat any
residual marks on white fabrics with bleach and then
rinse thoroughly.
Tar stains: first treat with stain remover, methylated
spirits or benzine, then rub with detergent paste.
(*) do not use acetone on artificial silk.
Detergents and additives
Good washing results also depend on the choice of
detergent and use of the correct quantities to avoid
waste and protect the environment. Although
biodegradable, detergents contain substances
which, in large quantities, can upset the delicate
balance of nature.
The choice of detergent will depend on the type of
fabric (delicates, woollens, cottons, etc.), the colour,
washing temperature and degree of soiling.
All commonly available washing machine detergents
may be used in this appliance:
– powder detergents for all types of fabric,
– powder detergents for delicate fabrics (60°C max)
and woollens,
– liquid detergents, preferably for low temperature
wash programmes (60°C max) for all types of
fabric, or special for woollens only.
The detergent and any additives must be placed in
the appropriate compartments of the dispenser
drawer before starting the wash programme.
If using concentrated powder or liquid detergents, a
programme without prewash must be selected.
The washing machine incorporates a recirculation
system which allows an optimal use of the
concentrated detergent.
Pour liquid detergent into the dispenser drawer
compartment marked just before starting the
programme.
Any fabric softener or starching additives must be
poured into the compartment marked before
starting the wash programme.
Follow the product manufacturer’s recommendations
on quantities to use and do not exceed the «MAX»
mark in the detergent dispenser drawer.
Quantity of detergent to be used
The type and quantity of detergent will depend on
the type of fabric, load size, degree of soiling and
hardness of the water used.
Water hardness is classified in so-called “degrees” of
hardness. Information on hardness of the water in
your area can be obtained from the relevant water
supply company, or from your local authority.
Follow the product manufacturer’s instructions on
quantities to use.
Use less detergent if:
– you are washing a small load,
– the laundry is lightly soiled,
– large amounts of foam form during washing.
Degrees of water hardness
Level Characteristic
Degrees
German
°dH
French
°T.H.
soft
medium
hard
very hard
0- 7
8-14
15-21
more than
21
0-15
16-25
26-37
more than
37
1
2
3
4
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 38
44
Programme table
Special washing programmes
Programme
selector
dial
position
Inicio retardado
Reduc. centrifuga
Antiarrugas (*)
ACLARADOS
CENTRIFUGADO
DESCARGA
PARADA
Washing
programme
Stains and type of fabric Description
Possible option
With this programme it is
possible to rinse and spin
garments which have been
washed by hand.
The machine performs 3 rinses,
and it finishes with a short spin.
This programme can be used to
perform a spin: for garments
washed by hand, for example: to
wring them out, before hanging
them up.
This programme can be used to
drain and spin, too, when
RINSE HOLD option has
been selected.
To drain the water from the last
rinse in programmes with
RINSE HOLD option
selected.
To cancel the running wash
programme and to switch the
machine off.
3 rinses
Short spin
Short spin
Water drain
O
(*) When this option is selected, the last rinse water does not drain to avoid wrinkling in the fabrics. To drain
the water select SPIN or DRAIN programme.
5 kg
5 kg
5 kg
Load
Reduc. centrifuga
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 44
45
ENGLISH
1. Bodywork
Clean the outside of the machine with warm water
and a neutral, non-abrasive household detergent.
Rinse with clean water and dry with a soft cloth.
Important: do not use methylated spirits, solvents or
similar products to clean the bodywork.
2. Detergent dispenser drawer
After a while, detergents and fabric softeners leave
deposits in the drawer.
Clean the drawer from time to time by rinsing it under
a running tap. To remove the drawer from the
machine, press the button in the rear left-hand
corner.
To facilitate cleaning, the top part of the additive
compartments can be removed.
Detergent can also accumulate inside the drawer
recess: clean it with an old toothbrush. Refit the
drawer after cleaning.
C0073
R0072
3. Cleaning of the drainage area
The drainage area must be cleaned if the pump has
been blocked with objects such as buttons, safety
pins, coins, etc. , or if lint has built up because
clothes that generate lint have been washed at high
temperatures.
Pull out the plug from the power socket.
If necessary, wait until the water has cooled down.
Open the drainage area door.
Place a bowl to collect the water.
Turn slowly the lid of the diaphragm towards left
side and allow that the water of the washing
machine goes flowing slowly to the bowl.
When the bowl is full, turn and close the lid of the
diaphragm.
Empty the bowl. Repeat the procedure until you
have completely emptied the washing machine.
To continue, unscrew the lid of the diaphragm by
turning it counter clockwise and pull it out.
Always keep a rag nearby to dry up spillage of
water when removing the cover.
Remove the objects such as buttons, coins and the
lint that has been accumulated in the area of the
pump impeller by rotating it.
Screw the lid of the diaphragm clockwise, be sure
is completely tighten.
Close the drainage area door.
Maintenance
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 45
46
4. The water inlet hose filter
If your water is very hard or contains traces of lime
deposit, the water inlet filter may become clogged.
It is therefore a good idea to clean it from time to
time.
Turn off the water tap. Unscrew the water inlet hose.
Clean the filter using a hard bristle brush.
Tighten up the inlet hose.
5. Emergency emptying out
If the water is not discharged (outlet pump is
blocked, filter or drain hose are clogged), proceed as
follows to empty out the machine:
pull out the plug from the power socket;
close the water tap;
if necessary, wait until the water has cooled down;
open the drainage area door;
place a bowl to collect the water;
release the emergency emptying hose, place it in
the bowl and remove its cap, when the bowl is full
put the cap back on the emergency emptying hose;
empty the bowl, repeat the procedure until you
have completely emptied the washing machine;
replace the emergency emptying hose in its initial
position and close the drainage area door.
P1090
6. Frost precautions
If the machine is installed in a place where the
temperature could drop below 0°C, proceed as
follows:
disconnect the appliance;
close the water tap;
if necessary, wait until the water has cooled down;
open the drainage area door;
place a bowl to collect the water that will flow out;
release the emergency emptying hose, place it in
the bowl and remove its cap;
when the water stops flowing out, put the cap back
on the emergency emptying hose, replace the
emergency emptying hose in its initial position and
close the drainage area door.
By doing this, any water remaining in the machine is
removed, avoiding the formation of ice and,
consequently, breakage of the affected parts.
When you use the machine again, make sure that
the ambient temperature is above 0°C.
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 46
47
ENGLISH
Something not working?
Problems which can be resolved without a technician's help.
Problems Possible cause
- The machine does not start up:
The door has not been closed.
The plug is not properly inserted in the power socket.
There is no power in the socket.
The main fuse or the fuse in the plug has blown.
The programme selector dial is not correctly
positioned and INICIO / PAUSA button has not been
pressed.
The water tap is off.
The filter in the inlet hose is blocked.
The inlet hose may be squashed or kinked.
The door has not been closed.
The end of the drain hose is lower than the
machine.
The end of the drain hose is submerged in water.
There is no air circulation in the installation,
between the machine drain hose and the one in the
house.
The drain hose may be squashed or kinked.
RINSE HOLDoption has been selected.
The drain pump may be blocked.
The drain hose extension is not correct. Follow the
instructions to connect it to the drain.
The drainage system pipes are blocked.
The laundry load is off balance: redistribute the
garments in the drum to allow the machine to spin.
There is too much detergent or an inappropriate
detergent has been used (it makes too much foam).
Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this as
the water runs down the hose; check to see if it is
damp.
The drain hose may be damaged or is not securely
positioned to prevent leaks.
The detergent dispenser drawer is clogged.
The drainage system pipes are blocked.
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without
calling technical service. Before contacting your local Service Force Centre, please check the following possible
problems listed below.
During machine operation it is possible that FIN light flashes to indicate that something is not working correctly.
4 flashes = door open.
2 flashes = the water is not drained.
1 flash = there is no water filling.
Once the problem has been eliminated, press INICIO / PAUSA button to restart the programme. If after all
checks, the problem persists, contact your local Service Centre.
- The machine does not fill:
- The machine fills then empties
immediately:
- The machine does not drain and / or
does not spin:
- There is water on the floor:
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 47
48
Problems Possible cause
Little detergent or an inappropriate one has been
used. An insufficient amount of detergent leaves the
laundry looking grey.
Stubborn stains have not been treated prior to
washing.
The correct wash programme has not been
selected.
Too much laundry has been placed in the drum.
The transit bolts and packaging have not been
removed.
The machine is in contact with the wall or furniture.
The machine is not level and stable (check
diagonally).
The laundry is not well distributed in the drum.
There may not be enough laundry in the drum.
The programme is still running.
The door lock has not released yet.
Water in the tub: if there is water in the tub, the door
cannot be opened (
RINSE HOLD option
selected).
The electronic off balance detection device has
interrupted the spin because the laundry is not evenly
distributed in the drum. The laundry is redistributed by
reverse rotation of the drum. This may happen
several times before the off balance disappears and
normal spinning can resume. If, after 10 minutes, the
laundry is still not evenly distributed in the drum, the
machine will not spin. In this case, redistribute the
load manually and re-select the spin programme.
The machine is fitted with a type of motor which
makes an unusual noise compared to other traditional
motors. This new motor ensures a smoother starting
and an even distribution of the laundry in the drum
when the machine is spinning. At the same time it
increases the appliance stability.
Appliances using modern technology are energy
efficient. They use very little water without affecting
washing results.
- Unsatisfactory washing results:
- The machine vibrates when spinning:
- The door does not open::
- Spinning starts late or the machine
does not spin:
- The machine makes an unusual noise:
- No water is visible in the drum:
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 48
49
ENGLISH
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning, make
a note of the model, serial number and purchase
date of your machine: the Service Centre will require
this information.
P1035UK
Water is not
visible in the machine. The machine,
which is the result of modern technology, runs
in a very economical way with low water
consumption. Performance is
nevertheless excellent.
The machine makes an unusual
noise. The machine is fitted with a commutator
motor which improves machine
performance.
P1034UK
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 49
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 50
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 51
EHPOESL/Z
35.292.986…ZWF382-3102.qxd 14/11/06 12:54 Página 52
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Zanussi ZWF3102 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Zanussi ZWF3102

Zanussi ZWF3102 Bedienungsanleitung - Holländisch - 22 seiten

Zanussi ZWF3102 Bedienungsanleitung - Spanisch - 28 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info