Bedienungsanleitung Zanussi ZWF81263WT (Seite 11 von 20) (Englisch)

649504

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

A tune sounds when the appliance is activated.

The appliance performs a start up animation.

The animation quickly shows each washing

programme and the default temperature and

spin settings.

The display shows the word On.

Setting a programme

1. Touch the programme button and set the

programme:

• The indicator of the button flashes.

• The display shows the programme

duration.

2. If necessary, change the temperature and

the spin speed or add available options.

When you activate an option, the indicator

of the set option comes on.

If you set something incorrect, the

display shows the message .

Starting a programme without the

Finish In option

Touch the button .

• The indicator of the button stops to

flash and stays on.

• The programme starts, the door locks,

the indicator is on.

• The drain pump can operate for a short

time at the beginning of the washing

cycle.

After approximately 15 minutes from

the start of the programme:

• The appliance adjusts

automatically the programme

duration agree with the laundry

load.

• The display shows the new value.

Starting a programme with the Finish In

option

1. Touch the button again and again to

choose the number of hours in which you

want the washing cycle to be finished.

The display shows the number of hours you set

(e.g. ) and the indicator above the button

is on to show that his option is active.

2. Touch the button :

• The door is locked.

• The appliance starts the countdown.

• When the countdown is completed, the

programme starts automatically.

You can cancel or change the set of

the Finish In option before you touch

the button . After touching the

button you can only cancel the

Finish In option.

To cancel the the Finish In option:

a. Touch the button to set the

appliance to pause. The indicator of

button flashes.

b. Touch the button until the indicator

above this button goes off.

Touch the button again to start the

programme immediately.

Interrupting a programme and changing

the options

You can change only some options before they

operate.

1. Touch .

The indicator of this button flashes.

2. Change the options. If you change any

option the Finish In option (if set) will be

disabled.

3. Touch again.

The programme continues.

Cancelling a programme

1. Press the button for some seconds to

cancel the programme and to deactivate the

appliance.

2. Press the same button again to activate the

appliance. Now, you can set a new washing

programme.

Before starting the new programme

the appliance could drain the water.

In this case, make sure that the

detergent is still in the detergent

compartment, if not fill the detergent

again.

Opening the door

While a programme (or the ) operates, the

appliance door is locked. The indicator is

on.

www.zanussi.com 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi ZWF81263WT Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info