Bedienungsanleitung Zanussi ZWF943A2DG (Seite 20 von 32) (Englisch)

765773

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

The AutoAdjust detection is carried

out with complete washing

programmes only and if the

programme duration has not been

reduced by means of the FlexiTime

button.

INTERRUPTING A PROGRAMME AND

CHANGING THE OPTIONS

When the programme is running, you can change

only some options:

1. Touch the Start/Pause button.

The related indicator ﬂashes.

2. Change the options. The given information in

the display changes accordingly.

3. Touch the button Start/Pause again.

The washing programme continues.

CANCELLING A RUNNING PROGRAMME

1. Press the button ON/OFF to cancel the

programme and to deactivate the appliance.

2. Press the button ON/OFF again to activate the

appliance.

If the AutoAdjust System has

completed and the water ﬁlling has

already started, the new programme

starts without repeating the

AutoAdjust System. The water and

the detergent are not drained out in

order to avoid waste. The display

shows the maximum duration of the

programme, updating it about 20

minutes after the starting of the new

programme.

There is also an alternative way of cancelling:

1. Rotate the selector knob to the "Reset" position

2. Wait for 1 second. The display shows .

Now, you can set a new washing programme.

OPENING THE DOOR - ADDING GARMENTS

If the temperature and level of the

water in the drum are too high and/or

the drum is still rotating you should not

open the door.

While a programme or the delay start operates, the

appliance door is locked. The display shows the

indicator .

1. Touch the Start/Pause button.

In the display the related door lock indicator goes

off.

2. Open the appliance door. If necessary, add or

remove the items. Close the door and touch

the Start/Pause button.

The programme or the delay start continues.

END OF THE PROGRAMME

When the programme has ﬁnished, the appliance

stops automatically. The acoustic signals operate (if

they are active). The display shows

The indicator of the Start/Pause button goes

off.

The door unlocks and the indicator goes off.

1. Press button ON/OFF to deactivate the

appliance.

After ﬁve minutes from the end of the programme,

the energy saving function automatically

deactivates the appliance.

When you activate the appliance

again, the display shows the end of

the previous programme. Turn the

programme dial to set a new cycle.

2. Remove the laundry from the appliance.

3. Make sure that the drum is empty.

4. Keep the door and the detergent dispenser

slightly ajar to prevent mildew and odours.

5. Close the water tap.

DRAINING WATER OUT AFTER END OF

CYCLE

If you have chosen a programme or an option that

does not empty out the water of the last rinse, the

programme is completed, but:

• The time area shows and the display

shows the door locked .

• The drum still turns at regular intervals to

prevent creases in the laundry.

• The door stays locked.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zanussi ZWF943A2DG Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info