Bedienungsanleitung Zebra ZT210 (Seite 185 von 194) (Englisch)

671483

185

Zoom out

Zoom in

Vorherige Seite

1/194

Nächste Seite

185

Glossary

11/5/15 P1048261-005

media sensor This sensor is located behind the printhead to detect the presence of media

and, for non-continuous media, the position of the web, hole, or notch used to indicate the start

of each label.

media supply hanger The stationary arm that supports the media roll.

non-continuous media Media that contains an indication of where one label/printed

format ends and the next one begins. Examples are die-cut labels, notched tag-stock, and stock

with black mark registration marks.

non-volatile memory Electronic memory that retains data even when the power to the

printer is turned off.

notched media A type of tag stock containing a cutout area that can be sensed as a start-of-

label indicator by the printer. This is typically a heavier, cardboard-like material that is either

cut or torn away from the next tag. (See non-continuous media.)

peel-off A mode of operation in which the printer peels a printed label away from the

backing and allows the user to remove it before another label is printed. Printing pauses until

the label is removed.

print speed The speed at which printing occurs. For thermal transfer printers, this speed is

expressed in terms of ips (inches per second).

printhead wear The degradation of the surface of the printhead and/or the print elements

over time. Heat and abrasion can cause printhead wear. Therefore, to maximize the life of the

printhead, use the lowest print darkness setting (sometimes called burn temperature or head

temperature) and the lowest printhead pressure necessary to produce good print quality. In the

thermal transfer printing method, use ribbon that is as wide or wider than the media to protect

the printhead from the rough media surface.

registration Alignment of printing with respect to the top (vertical) or sides (horizontal) of a

label or tag.

ribbon A band of material consisting of a base film coated with wax or resin “ink.” The

inked side of the material is pressed by the printhead against the media. The ribbon transfers

ink onto the media when heated by the small elements within the printhead. Zebra ribbons

have a coating on the back that protects the printhead from wear.

ribbon wrinkle A wrinkling of the ribbon caused by improper alignment or improper

printhead pressure. This wrinkle can cause voids in the print and/or the used ribbon to rewind

unevenly. This condition should be corrected by performing adjustment procedures.

roll media Media that comes supplied rolled onto a core (usually cardboard). Contrast this

with fanfold media.

supplies A general term for media and ribbon.

symbology The term generally used when referring to a bar code.

tag A type of media having no adhesive backing but featuring a hole or notch by which the

tag can be hung on something. Tags are usually made of cardboard or other durable material.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zebra ZT210 Seite 185

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zebra ZT210

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info