671482
3
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
3
Preparing the Printer for Use
11/5/15 P1060608-004
Preparing the Printer for Use
After you have familiarized yourself with the printer components, prepare the printer for use.
To set up the printer, complete these steps:
1. Select a location for the printer that meets these conditions:
The surface must be solid and level of sufficient size and strength to hold the printer.
The area must include enough space for ventilation and for accessing the printer
components and connectors
The printer should be within a short distance of an appropriate power outlet that is
easily accessible
The printer must be within range of your WLAN radio (if applicable) or within an
acceptable range for other connectors to reach your data source (usually a computer).
For more information on maximum cable lengths and configuration, refer to the User
Guide.
2. Unpack and inspect the printer. If necessary, report any shipping damage. For more
information, refer to the User Guide.
3. Place the printer in the preselected location.
4.
Caution • When you are loading media or ribbon, remove all jewelry that could come into
contact with the printhead or other printer parts.
Caution • Before touching the printhead assembly, discharge any built-up static electricity
by touching the metal printer frame or by using an anti-static wriststrap and mat.
Important • You must install the Zebra Setup Utilities program before connecting the
printer to your computer. Your computer will not install the correct printer drivers if you
connect the printer to it without the Zebra Setup Utilities program.
Install the Zebra Setup Utilities program from http://www.zebra.com/setup. Use this
program to install the printer drivers on your computer. For detailed instructions, refer to
the User Guide.
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Zebra ZT400 Serie wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Zebra ZT400 Serie

Zebra ZT400 Serie Kurzanleitung - Deutsch - 16 seiten

Zebra ZT400 Serie Kurzanleitung - Holländisch - 16 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info