Bedienungsanleitung Zehnder ComfoControl Luxe (Seite 46 von 68) (Deutsch, Englisch, Holländisch, Französisch)

522956

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ventilation and/or cooling system for long periods.

2.3.2 ComfoControl ﬁ lter warning

If the ventilation system’s ﬁ lters require replacement (or

cleaning), then the “FILTERS – REPLACE FILTERS” warn-

ing appears on the ComfoControl display.

To replace (or clean) any ﬁ lters, please refer to

your ventilation system’s user manual.

Once the ventilation system’s ﬁ lters have been replaced

(or cleaned), then follow the steps below to delete the ﬁ lter

warning from the ComfoControl display:

• Press “

” to go to “SYSTEM STATUS”.

• Press “ ” to delete the “FILTERS– REPLACE FIL-

TERS” warning.

2.3.3 Information about ComfoControl status

In the absence of error message, you will see:

• “CHECK: OK” on the ComfoControl display.

Information on the status of your ventilation and/or cool-

ing system can then be accessed. This goes as follows:

• Press “

” to go to “SYSTEM STATUS”.

The “SYSTEM STATUS” screen displays all the system

data on the ComfoControl.

• Press “ ” to return to the main screen.

2.4 End of useful life

Consult your supplier as to what you should do with the

ComfoControl at the end of its useful life. If the Comfo-

Control cannot be returned to the supplier, avoid dis-

posing of it with the industrial waste, and ask your local

council about the options for recycling the components

or processing the materials in an environmentally friendly

manner.

3 For the Fitter

This chapter describes how to ﬁ t the ComfoControl.

3.1 Installation conditions

In order to determine whether the ComfoControl can be

installed in a certain area, the following aspects must be

taken into account:

• The ComfoControl must be mounted 1.5 metres from

the ﬂ oor.

• The ComfoControl must be ﬁ tted to allow sufﬁ cient air

to circulate. For example, not behind a cupboard, or in

a corner.

• The ComfoControl must not be located close to a heat

source, such as radiators, TVs, lamps, etc. Direct sun-

light must also be avoided.

• The ComfoControl must not be located close to a cold

source, such as cold-water pipes or unheated walls

(due to poorly heated areas on the other side of the

wall), etc.

• The following facilities must be available in the living

area concerned:

– Flush-ﬁ t casing for the ComfoControl.

– 12V DC power supply from the

ventilation system.

– A/B communication cable from the

ventilation system.

3.2. Installing ComfoControl

3.2.1 Transport and unpacking

• Take care when transporting and unpacking the Com-

foControl.

Make sure the packing material is disposed of in

an environmentally friendly manner.

3.2.2 Checking the delivery

Contact your supplier immediately in case of damage or

an incomplete delivery. The delivery includes:

• ComfoControl.

• Mounting bracket (ﬁ tted to the bottom of the Comfo-

Control).

• Connectors (ﬁ tted to the rear of the ComfoControl on

the PCB).

• User manual.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zehnder ComfoControl Luxe Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info