Bedienungsanleitung Zelmer 281 (Seite 44 von 46) (Englisch, Polnisch)

538961

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

48 381-129_v01

The reverse assembling of the mixers can

cause lifting up the dough (taking the dough

out of bowl).

The level of products inside the bowl should

not exceed the hight of mixers or whisks

working part (L).

Operation with liquidising disc (Fig. E)

Liquidizing disc is used for liquidizing boiled fruit and

●

vegetables such as: carrots, potatoes, tomatoes, apples

through the sieve. It partly replaces the function of the

mixing adapter.

Insert the liquidizing disc on the whisk with toothed bar

from the bottom side.

Insert the whisk into the socket marked with a star.

Cup (12)

Made of transparent material is used as a container when

mixing adapter is used.

Operation with mixing adapter (Fig. F)

You can use the mixing adapter for:

mixing liquids,

●

crumbling boiled vegetables and raw, soft fruit,

●

preparing different mayonnaise and pastes,

●

preparing soups for infants.

●

crushing ice (metal adapter only).

●

You can assemble the adapter after moving the cover.

Gently press the bolt and slide towards the direction

shown in the gure.

Insert the threaded part into the motor casing hole and

screw it turning right until you feel the refusal.

Inadequate screwing of the mixing adapter can

result in clutch damage or the adapter damage.

Put the adapter into the processed product and switch

the mixer on.

Operation with mixing cup (Fig. G)

Hold the mixer in your hand all the time during

operation.

Mixing cup is intended for infant soups preparation, milk

shakes or pancake dough.

It has the label „500 ml max” on both sides, which

●

indicates the maximum level of product to ll the cup and

graphic scale to determine the volume 200 ml to 500 ml

(according to the symbols in the drawing beside).

After moving the cover (like during assembling the

adapter) assemble the cup the following way: Insert the

mixing cup on the motor part so that the 3 buckles visible at

the bottom of the cup got into the nuts of the motor casing.

Holding the motor casing handle turn the cup clockwise

direction until you feel the refusal.

You shall obtain the proper connection, when the 3 buckles get

under the motor casing, and the fastener on the cup rib move

on the other side of the spherical buckle on the motor casing.

Fill the cup with products and put the cover with the doser

on – you can add next products to the cup during operation.

Operation with stand including turnable bowl (Fig. H)

The stand with assembled motor part makes the operation

with whisks or mixers easy, as the user does not have to hold

the device.

The stand head driver automatically makes the head move

pendulum-like and simultaneously turns the bowl with the

mixed product.

You can use the stand with specially prepared whisks and

mixers only. The device equipped with stand includes also

one mixer and one whisk with toothed bar.

Insert the mixers or whisks into the motor casing (as

described above).

Assemble the drive in the stand head after moving the

cover (like during assembling the adapter) the following way:

Insert the drive fasteners (which are located near the holes

for whisks assembling) under the stand head fastener.

Turn the control clamp to the limit in such a way that the

hand is positioned vertically.

Press the fastener button and simultaneously deect the

stand head with the motor part back.

If the bowl with products a bit up and then insert it on the

three insertions and place it at the stand base.

Place the stand head with the motor part in horizontal

position (you will hear the clicking sound of fastener blocking

clamps).

Start-up the mixer with the switch lever and it will make the

●

bowl turn and the head with drive move pendulum-like.

Never block or stop the oscillatory movement

during operation. It may cause damage to the

housing.

After operation (Fig. I)

Switch the mixer off and unplug it.

Depending on assembled equipment:

Push the whisks or mixers out with a pushing button.

Disassemble the liquidizing disc from the whisk.

Disassemble the mixing adapter or mixing cup in reverse

●

way to assembling it.

Deect the stand head with the motor part back.

Turn the clamp knob in counter clockwise direction as

much as possible and put the motor out of the head fasteners.

Wind the power cord on the motor part and put the last

winding under the insert.

1 cm L 1 cm L

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer 281 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info